Publicidad
q
220013*
e
w
216013*
EMU00435
ENGINE FAILS TO OPERATE
If battery voltage is low or in the unlikely
event of an ignition system malfunction,
the engine speed may become erratic or
the engine may stop.
In such a case, follow the procedure
below.
1) Remove the CDI unit cover 1.
2) Disconnect the connection on the yel-
low cord 2 (emergency circuit) of the
CDI unit 3 to return to port.
w
When the connection is disconnected, the
idling and low speeds are slightly higher
than normal. Use care when starting off
or stopping.
cC
Follow this procedure only in an emer-
gency and just long enough to return to
port for repairs.
5-8
GB
Publicidad
