GreenWorks GD48LM46SP Manual Del Operario página 4

EN
1 DESCRIPTION
1.1 PURPOSE
This machine is used for domestic lawn mowing. The
cutting blade must be approximately parallel to the
ground. All four wheels must touch the ground while you
mow.
1.2 OVERVIEW
Figure 1-11.
Handle knob
1
Lower handle
2
Bracket
3
Upper handle
4
Bolt
5
Knob
6
Grass catcher
7
Mulch plug
8
Side discharge chute
9
Rear discharge door
10
Grass catcher handle
11
Hook
12
Door rod
13
Mulch plug handle
14
Discharge chute
15
Side discharge door
16
Recesses
17
Pivot
18
Height adjustment lever
19
Battery door
20
Battery compartment
21
Safety key
22
Battery release button
23
Start button
24
Handle bar
25
Bail switch
26
Self-propel lever
27
Speed control button
28
Blade
29
Wood
30
Mounting screw
31
Arrows
32
2 SAFETY
Make sure that you do/obey all safety instructions.
Refer to Safety Manual.
WARNING
English
3 INSTALLATION
Do not change or make accessories that are not
recommended by the manufacturer.
Do not put in the safety key or the battery pack until
you assemble all the parts.
3.1 UNPACK THE MACHINE
Make sure that you correctly assemble the machine
before use.
• If the parts are damaged, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
3.2 UNFOLD THE LOWER HANDLE
Figure 2.
1. Pull and turn the handle knobs 90°.
2. Unfold the lower handle.
3. Line up the handle knobs in one of the three
positions on the brackets.
4. Turn the handle knobs 90° until they engage the
holes in the brackets.
Make sure that the two handle knobs are in the same
position.
Do not make damage to the cables when you fold or
unfold the handle.
3.3 INSTALL THE UPPER HANDLE
Figure 3.
4
WARNING
WARNING
WARNING
WARNING
NOTE
WARNING