Publicidad
Idiomas disponibles
Idiomas disponibles
If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly
qualified persons in order to avoid a hazard.
TROUBLESHOOTING
1.
If your power tool does not start, check the plug on the
power supply first.
2.
If the drill doesn't work properly, check the drill bit for
sharpness, replace drill bit if worn. Check that the drill
is set to forward rotation for normal use.
3.
If a fault can not be rectified, return the tool to an
authorized dealer for repair.
EN
13
Publicidad
