Electrolux ETGC24R0MKS Manual De Instrucciones página 20

37 electrolux installation
Cut out dimensions (mm)
Model
ETGC24R0MKS
ETGC24R0M(P,C)KS
ETGB24RF0MKB
ETGB27CT0MKB
ETGC30T0MKS
ETGC30T0M(P,C)KS
A
50
B
A B
553 mm 473 mm
340 mm 600 mm
728 mm 473 mm
750 min
400 min
400 min
Electric installation
For your safety, check the electric conditions of the place where the gas
cooktop will be installed by a qualify electrician or contact an authorize service.
01. Before turning on the cooktop,
check to see if the voltage of the
outlet to be used is the same as
that indicated on the tag located
close to the plug (along the power
cord) or on the gas cooktop
identification label.
02. Install the ground cable or your
gas cooktop according to your
local requirements.
03. If you need to modify the electric
installation, this should be
performed by qualified personnel.
04. Be sure that electric plug is easy
to reach after installation.
05. Power cord should never be in
contact with hot parts of the gas
cooktop, because the plastic
protection might melt causing a
short circuit.
06. Connect the cooktop to its own
outlet. Do not use an extension
cord or adaptor plug.
07. Never ground the appliance on
PVC or gas pipes.
08. Be sure that the power cord does
not goes through the back of the
gas cooktop.
installation electrolux 38
If you have any doubt, please contact
a qualified person.
Do not modify your gas cooktop plug.
Do not bite, twist or tie the power
cord.
It is dangerous to modify the cooktop
specifications or features.