Descargar Imprimir esta página

LG SIGNATURE LUTE4619SN Manual Del Propietário página 42

Ocultar thumbs Ver también para SIGNATURE LUTE4619SN:

Publicidad

Idiomas disponibles

Idiomas disponibles

42 MAINTENANCE
Setting Self Clean with a Delayed
Start
1
Remove all racks and accessories from the
oven.
2
Turn the oven mode knob to select Self Clean.
The oven defaults to the recommended
four-hour self clean for a moderately soiled oven.
Press plus(+) or minus(-) repeatedly to cycle
through self-clean times in the upper or lower
oven. Both ovens cannot use the self-clean
function at the same time.
3
Press Start Time.
4
Press plus(+) or minus(-) to enter the time of
day you would like the Self Clean to start.
5
Press Start.
NOTE
It may become necessary to cancel or interrupt a
Self Clean cycle due to excessive smoke or fire in
the oven. To cancel the Self Clean function, press
Clear/Off.
During Self Clean
The Self Clean cycle uses extremely hot
temperatures to clean the oven cavity. While
running the Self Clean cycle, you may notice
smoking or an odor. This is normal, especially if the
oven is heavily soiled.
As the oven heats, you may hear sounds of metal
parts expanding and contracting. This is normal
and will not damage the oven.
Do not force the oven door open when the lock
is displayed. The oven door remains locked until
the oven temperature has cooled. Forcing the door
open will damage the door.
After the Self Clean Cycle
The oven door remains locked until the oven
temperature has cooled.
You may notice some white ash in the oven. Wipe it
off with a damp cloth or a soap-filled steel wool pad
after the oven cools. If the oven is not clean after
one self-clean cycle, repeat the cycle.
If oven racks were left in the oven and do not slide
smoothly after a self-clean cycle, wipe racks and
rack supports with a small amount of vegetable oil
to make them glide more easily.
Fine lines may appear in the porcelain because it
went through heating and cooling. This is normal
and will not affect performance.
NOTE
The Self Clean cycle cannot be started if the
Lockout feature is active.
Once the Self Clean cycle is set, the oven door
locks automatically. You will not be able to open
the oven door until the oven has cooled. The
lock releases automatically.
Once the door has been locked, the lock
indicator light stops flashing and remains on.
Allow about 15 seconds for the oven door lock
to activate.
If the clock is set for a 12-hour display (default)
the Delayed Self Clean can never be set to
start more than 12 hours in advance.
After the oven is turned off, the convection
fan keeps operating until the oven has cooled
down.

Publicidad

loading