Publicidad
NOTE: All references made in this manual to right, left, front, rear, top or bottom are as viewed facing the di-
rection of forward travel with implement properly attached to tractor.
The Models 4815/14815 Rotary Cutter consists of a center unit with two variable position wings together hav-
ing a cutting width of 15 feet (4.6m). The Models 4810/14810 Rotary Cutter consists of a center unit with one
variable position wing together having a cutting width of 10-1/2 feet (3.2m). Wing operating angles and ma-
chine cutting height are independently controlled using hydraulic cylinders. A self-leveling linkage maintains
a level cutter at all cutting heights.
Power from the tractor PTO is split at the power divider gearbox and supplied to each of the blade gearboxes.
Each blade gearbox has two free-swinging uplift blades designed to cut grass, corn stalks and light brush.
Free-swinging blades reduce the shock of impact when a stationary object is hit. Slip clutches are installed
on each gearbox for additional protection. Front and rear discharge shields are included as standard equip-
ment.
4815/14815
Cutting Width
15'
Transport Width
111"
Overall Width
186"
Overall Length
193"
Cutting Height
2" -14"
HP Required (min)
60HP
Cutting Capacity (max) 4"
Drawbar Load Rating (min) 2,158 lbs
Wing Flex Up
87°
Wing Flex Down
22°
4815/4810/14815/14810
© 2021 Alamo Group Inc.
INTRODUCTION
Equipment Specifications
4810/14810
10'
106"
142"
193"
2" -14"
60HP
4"
2,158 lbs
87°
22°
04/21
Introduction Section 2-3
4815/14815
Blade Tip Speed
540 PTO
Center
16,000 FPM
Wings
16,000 FPM
Gearbox Rating
Power Divider
250 HP
Center & Wings
225 HP
LImited Warranty
10 Year
Driveline Size
Main
CAT 6
Wings
CAT 5
4810/14810
1000 PTO
16,000 FPM
16,000 FPM
250 HP
225 HP
10 Year
CAT 6
CAT 5
Publicidad
