Página 1 2310 SERIES Model 2310R ROTARY MOWER Rigid Deck / Multi Spindle Manual Part No. 50081031 Publish Date 10/19 This Operator's Manual is an integral part of the safe operation Important Operating of this machine and must be and Safety Instructions maintained with the unit at all are found in the Mower times.
Página 5 SERIAL NUMBER LOCATION...
Página 6 DEALER to CUSTOMER Pre-Delivery/ Operation Instructions Dealer should inform the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable.Dealer should inform Purchaser to review the contents of the Operator’s Manual including safety equipment, safe operation, and maintenance, to review the Safety Signs on the implement (and tractor if possible), and of Purchaser’s responsibility to train his/her operators’s in safe operation procedures.
Página 7 TABLE OF CONTENTS SAFETY SECTION............................1-1 GENERAL SAFETY INSTRUCTIONS AND PRACTICES.................1-2 OPERATOR SAFETY ............................1-3 GENERAL OPERATING SAFETY........................1-3 CONNECTION OR DISCONNECTING IMPLEMENT SAFETY ................1-4 CRUSHING HAZARDS .............................1-5 THROWN OBJECTS HAZARDS........................1-6 RUN OVER HAZARDS............................1-8 PTO ENTANGLEMENT HAZARDS ........................1-9 MOWER BLADE CONTACT HAZARDS......................1-10 HIGH PRESSURE OIL LEAK HAZARDS ......................1-11 ELECTRICAL &...
Página 8 TABLE OF CONTENTS STARTING THE TRACTOR..........................4-9 CONNECTING THE MOWER TO THE TRACTOR ...................4-9 Connecting the Mower-Lift Type and Semi-Mount Type ..................4-10 3-Point Quick Hitch ............................4-10 Connecting Mower - Lift Type (Quick Hitch).....................4-11 Safety Tow Chain .............................4-11 Connecting the Mower-Pull Type ........................4-12 SETTING THE MOWER ..........................4-13 Setting Mower Height- Lift Type........................4-13 Setting Mowing Height-Pull Type ........................4-14 Setting Deck Pitch ............................4-14...
Página 9 TABLE OF CONTENTS BLADE CARRIER INSTALLATION........................5-13 BLADE PAN TIMING ............................5-13 SLIP CLUTCH ..............................5-14 Slip Clutch Operation Check..........................5-14 Slip Clutch Adjustment.............................5-14 STORAGE ...............................5-15 PROPER TORQUE FOR FASTENERS ......................5-16...
Página 24 SAFETY HAZARDS WITH MAINTENANCE OF IMPLEMENT AVOID SERIOUS INJURY OR DEATH FROM COMPONENT FAILURE BY KEEPING IMPLEMENT IN GOOD OPERATING CONDITION PERFORMING PROPER SERVICE, REPAIRS AND MAINTENANCE. BEFORE PERFORMING SERVICE, REPAIRS AND MAINTENANCE ON THE IMPLEMENT: SECURE EQUIPMENT FOR SERVICE BLOCK OUT POTENTIAL ENERGY HAZARDS;...
Página 27 SAFETY ITEM PART NO. LEVEL DESCRIPTION D559 WARNING Genuine Bush Hog Parts 50081028 NAME 2310 D614 DANGER Thrown Object Hazard 50058285 INFORMATION Warranty D546 DANGER Guard Missing-Do Not Operate D547 DANGER Rotating D/L Entanglement D553 WARNING Multi-Hazard D549 DANGER Thrown Object Hazard...
Página 36 SAFETY Federal Laws and Regulations This section is intended to explain in broad terms the concept and effect of federal laws and regulations concerning employer and employee equipment operators. This section is not intended as a legal interpretation of the law and should not be considered as such.
Página 38 Contents Acknowledgment ......2 Foreword ........2 Safety Alerts.
Página 39 Safety Alerts Symbol Signal Words This Safety Alert Symbol means: “ATTENTION! Signal words are distinctive words that will typically be STAY ALERT! YOUR SAFETY IS INVOLVED!” found on safety signs on the mower and other worksite equipment. These words may also be found in this The Safety Alert Symbol identifi es important safety manual and the manufacturer’s manuals.
Página 40 The Industrial/Agricultural Mower Industrial/Agricultural Mower Types Mowers are used for pasture clipping, crop residue shredding, heavy brush cutting, waterways, right-of- Flail ways, roadside or highway mowing. Also, these mowers are used for cutting grass and other growth in public areas such as parks and cemeteries. Boom Rotary Sickle Bar...
Página 41 Follow A Safety Program Protect Yourself Wear personal protective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions. You must ALWAYS wear safety glasses with side shields. You may also need: — Hard hat —...
Página 42 Follow A Safety Program Avoid Injury From Raised Equipment Avoid Injury From High Pressure Fluid Avoid possible crushing injury from falling mower or Avoid fl uid injection injury due to high pressure fl uid leaks. other raised equipment. High Pressure Fluid Can Inject into the Body Avoid Crushing –...
Página 43 Follow A Safety Program Be Alert! For Safe Operation Know where to get assistance. Know how to use a fi rst You must be a qualifi ed and authorized operator for aid kit and fi re extinguisher/fi re suppression system. proper operation of your machine.
Página 44 Follow A Safety Program Some Rules You Must Work By (continued) Keep — Only qualifi ed and authorized individuals may operate Children this equipment. Away from — Never allow children to play on, ride on or operate Equipment the equipment. Children are not qualifi ed to operate this equipment.
Página 45 Prepare For Safe Operation Check The Mower And Tractor Equipment Before beginning your work day inspect the machine Walk-Around and have all systems in good operational condition. Inspection WARNING! Prevent possible crushing injury from falling equipment. Hydraulic system or part failure could cause unsupported equipment to fall.
Página 46 Prepare For Safe Operation Know The Work Area Correct unsafe conditions. Do not operate in problem areas where debris and obstacles cannot be removed Before you operate the mower thoroughly inspect or marked. the work area. Walk around the area and inspect the Analyze mowing area to determine: surfaces you will travel on when using the mower.
Página 47 Prepare For Safe Operation Tractor And Mower Controls Safety Test — Raise and lower mower to check for driveline bottoming out or engagement problems. Start the tractor following the specifi c procedures in the — Check the equipment for excessive vibration and manufacturer’s operator’s manual.
Página 48 Prepare For Safe Operation Hitching Mower To Tractor Read and Three-point hitch-mounted mowers: Understand Manuals Before — Refer to mower and tractor manufacturers’ manuals. Operating — Place tractor’s hydraulic power lift (rockshaft) selector lever in down position to avoid unexpected movement.
Página 49 Start Safely Make The Right Start Mow only in daylight or good artifi cial light conditions. Rotating Blades – Avoid serious injury or death from mower-thrown Keep Away objects or blade contact: — Keep chain shields, fl exible or solid defl ector shields or discharge chutes in place and in good repair.
Página 50 Operate Safely Mower-Thrown Objects (continued) Disc Mowers — When using a disc mower it is Do Not Mow important to know the area to be mowed. If the operator in Reverse has mowed the fi eld before and is familiar with all obstacles that may be present, it is suffi cient to watch ahead of the mower path for any additional objects that may have entered the fi eld.
Página 51 Operate Safely Under Mount Mower Safety Practices When mowing with an under mount mower: Never Stand — Keep removable discharge chute in place and over on Mower – Keep Away discharge opening. — Never stand on a mower housing when the tractor engine is operating.
Página 52 Operate Safely Wing And Side Mount Mowers Safety Practices 300 ft (92 m) Raised wing positions reduce shielding protection and Keep Bystanders increases the thrown object and blade contact hazard Away from risks. Mowing Area Avoid possible serious injury or death by thrown objects or blade contact from raising and lowering wings during mowing operations: —...
Página 53 Operate Safely Uneven Terrain Mowing Safety Practices (continued) Maintain — Use extreme care to maintain control over the Control, Use Low equipment when operating in these conditions. Speeds — Increase tractor stability by adding wheel weights, ballast and increasing wheel spacing to maximum. Refer to operator’s manual for recommendations.
Página 54 Park Safely Parking Safety Practices — Use designated or out-of-traffi c areas. — Use fi rm level ground locations. Parking Brake — Set parking brake. — Lower raised equipment to ground. Shut down the mower and tractor using proper equipment shut down practice before dismounting tractor.
Página 55 Shut Down Safely Dismounting Properly — Never dismount from moving equipment. Wait for — Never jump from any machines. Moving Parts to Stop — Dismount carefully. — Check for slippery steps. — Keep feet and hands away from controls. — Use handholds and steps during dismount. —...
Página 56 Perform Maintenance Safely Prepare Yourself Wear personal protective clothing and Personal Protective Equipment (PPE) issued to you or called for by job conditions. You must ALWAYS wear safety glasses with side shields. You may also need: — Hard hat — Safety shoes —...
Página 57 Perform Maintenance Safely Prepare The Machine — Securely support, block up, or lock up mower wings with approved locking devices before working near or Stored energy sources (electrical, mechanical, hydraulic, underneath a wing mower. pneumatic, chemical, thermal, etc.) must be controlled —...
Página 58 Perform Maintenance Safely Perform Maintenance Safely Use Proper Ventilation Make sure the hoists or jacks you use are in good repair. Never use jacks with cracked, bent, or twisted parts. If it is necessary to run an engine in an enclosed area, Never use frayed, twisted or pinched cables.
Página 59 Perform Maintenance Safely Hydraulic System Hazards When venting or fi lling the hydraulic system, loosen the fi ller cap slowly and remove it gradually. The hydraulic system is under pressure whenever the Never reset any relief valve in the hydraulic system to a engine is operating and may hold pressure even after the pressure higher than recommended by the manufacturer.
Página 60 Perform Maintenance Safely Avoid Explosion — Observe the polarity of the batteries and connections. — Make the fi nal cable connection to the engine or the WARNING! Avoid possible serious injury from furthest ground point away from the battery. Never explosion.
Página 61 Perform Maintenance Safely Tire And Wheel Maintenance (continued) Never cut or weld on a wheel with an infl ated tire mounted on it. This could cause explosive WARNING! The types of wheels and tires usually decompression. found on this equipment require special care when Check that the tire size and wheel are correctly matched.
Página 62 Perform Maintenance Safely Mower Blade Maintenance (continued) — Avoid bending blades. Help prevent mower blades from bending or cracking by avoiding contact with — How are mower blades made? solid objects. Mower blades are intended to cut Mower blades are made of high strength alloy spring grass, shrubs, woody vegetation, and small trees and steel.
Página 64 Contenido Reconocimiento ....... 2 Introducción ........2 Alertas de seguridad .
Página 65 Alertas de seguridad Símbolo Palabras indicativas Este símbolo de alerta de seguridad signifi ca: Las palabras indicativas son palabras distintivas que “¡ATENCIÓN! ¡MANTÉNGASE ALERTA! ¡SU típicamente se encontrarán en letreros de seguridad SEGURIDAD ESTÁ EN RIESGO!” de la cortadora de césped y otros equipos del sitio de trabajo.
Página 66 Cortadora de césped industrial/para agricultura Tipos de cortadora de césped industrial/para agricultura Las cortadoras de césped se usan para recortar pasturas, Triturador desmenuzar residuos de cultivos, cortar arbustos, realizar desbroce pesado, cortar la hierba en vías de agua, derechos de paso, costados de caminos o autopistas. Además, estas cortadoras se usan para cortar la hierba y otras plantas en zonas públicas como parques y cementerios.
Página 67 Cumplimiento del programa de seguridad Protéjase a sí mismo Use la ropa de protección personal y los equipos de protección personal (PPE) que se le proporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales. Puede necesitar también: —...
Página 68 Cumplimiento del programa de seguridad Evite las lesiones provocadas por equipos elevados Si un ﬂ uido se inyecta en la piel, debe ser extraído dentro de pocas horas por personal médico Evite posibles lesiones de aplastamiento por caídas de la familiarizado con este tipo de lesión.
Página 69 Cumplimiento del programa de seguridad ¡Manténgase alerta! Para una operación segura Sepa dónde obtener asistencia. Sepa cómo usar un Usted debe ser un operador cualifi cado y autorizado equipo de primeros auxilios y un extintor de incendios/ para operar la máquina correctamente. Debe comprender sistema de supresión de fuego.
Página 70 Cumplimiento del programa de seguridad Algunas reglas que debe cumplir al trabajar (continuación) Mantenga — Únicamente personas cualifi cadas y autorizadas a los niños alejados pueden manejar estos equipos. de los equipos — Nunca permita que los niños jueguen en los equipos, viajen en ellos o los hagan funcionar.
Página 71 Preparación para una operación segura Revise los equipos de la cortadora de césped y el marcadas; incluya los pernos y sujetadores de las hojas. Nunca enderece o suelde en las hojas. tractor — Asegúrese de que el escudo para objetos que son Antes de comenzar la jornada de trabajo, inspeccione la arrojados se encuentre correctamente instalado y en buen máquina y asegúrese de que todos los sistemas estén en...
Página 72 Preparación para una operación segura Familiarícese con la zona de trabajo Corrija las condiciones no seguras. No opere en áreas con problemas donde no se puedan retirar o marcar los Antes de hacer funcionar la cortadora de césped, residuos y los obstáculos. inspeccione cuidadosamente la zona de trabajo.
Página 73 Preparación para una operación segura Prueba de seguridad de los controles del tractor y de la cortadora de césped Use el ROPS Arranque el tractor siguiendo los procedimientos y el cinturón de seguridad específi cos del manual del operador del fabricante. Estos procedimientos normalmente incluyen: —...
Página 74 Preparación para una operación segura Enganche de la cortadora de césped al tractor Lea y asegúrese Cortadoras montadas en enganche de tres puntos: de comprender los — Consulte los manuales de los fabricantes de la manuales antes de comenzar la cortadora y del tractor.
Página 75 Arranque con seguridad Cómo realizar un arranque correcto Corte la hierba únicamente con luz diurna o en condiciones de buena luz artifi cial. Hojas giratorias – Manténgase Evite lesiones graves o muerte producidas por objetos arrojados por la cortadora o por el contacto con las hojas: —...
Página 76 Operación con seguridad Objetos arrojados por la cortadora de césped Apague la TDF, espere que las hojas dejen de girar, eleve la cortadora y, después, retroceda. (continuación) Corte desplazándose en sentido de avance. Cortadoras de disco — Cuando se usa una cortadora de disco, es importante conocer la zona donde se va a cortar.
Página 77 Operación con seguridad Prácticas de seguridad para la cortadora de césped de montaje inferior Nunca se pare sobre la cortadora Cuando se traslada con una cortadora de césped de de césped – montaje inferior: Manténgase alejado — Mantenga la rampa de descarga extraíble en su lugar y por encima de la abertura de descarga.
Página 78 Operación con seguridad Prácticas de seguridad para cortadoras de 300 ft césped con laterales y montaje lateral (92 m) Mantenga a las personas ajenas Las posiciones elevadas de los laterales reducen la alejadas de la zona protección de los escudos y aumentan los riesgos de de corte objetos arrojados y contacto con las hojas.
Página 79 Operación con seguridad Prácticas de seguridad para trabajos de corte en terrenos desparejos (continuación) Mantenga — Use extremo cuidado para mantener el control de los el control, equipos cuando trabaja en estas condiciones. desplácese — Aumente la estabilidad del tractor agregando pesos o lastre en las ruedas y aumentando al máximo la separación entre las ruedas.
Página 80 Estacionamiento seguro Prácticas de seguridad para el estacionamiento — Use las zonas designadas o alejadas del tránsito. Aplique el freno de — Use lugares con suelo fi rme y nivelado. estacionamiento — Aplique el freno de estacionamiento. — Descienda el equipo de la cortadora de césped hasta el suelo.
Página 81 Apagado con seguridad Descenso correcto — Nunca descienda de equipos en movimiento. Espere hasta que las — Nunca baje de una máquina saltando. piezas móviles se detengan — Descienda con cuidado. — Verifi que que no haya peldaños resbaladizos. — Mantenga los pies y las manos lejos de los controles. —...
Página 82 Realización de mantenimiento con seguridad Preparación personal Use la ropa de protección personal y los equipos de protección personal (PPE) que se le proporcionen o que requieran las condiciones del trabajo. SIEMPRE debe usar gafas de seguridad con escudos laterales. Puede necesitar también: —...
Página 83 Realización de mantenimiento con seguridad Preparación de la máquina Deben controlarse o reducirse las fuentes de energía Prepare los sistemas de la almacenada (eléctricas, mecánicas, hidráulicas, máquina para neumáticas, químicas, térmicas, etc.) al mínimo realizarles servicios practicable antes de realizar cualquier procedimiento de mantenimiento, reparación o servicio.
Página 84 Realización de mantenimiento con seguridad Use ventilación adecuada Si es necesario hacer funcionar un motor en una zona Retire la llave y cerrada, elimine del área las emanaciones de escape lea el manual de con una extensión del caño de escape. Si no tiene esa mantenimiento extensión, asegúrese de abrir las puertas y dejar entrar aire del exterior.
Página 85 Realización de mantenimiento con seguridad Riesgos del sistema hidráulico Cuando ventila o llena el sistema hidráulico, afl oje la tapa de llenado con lentitud y retírela gradualmente. El sistema hidráulico se encuentra bajo presión siempre Nunca restablezca una válvula de alivio del sistema que el motor está...
Página 86 Realización de mantenimiento con seguridad Evite explosiones — Asegúrese de que las máquinas no se estén tocando. — Observe la polaridad de las baterías y conexiones. ¡ADVERTENCIA! Evite posibles lesiones graves por — Realice la conexión fi nal de cable al motor o al punto explosiones.
Página 87 Realización de mantenimiento con seguridad Mantenimiento de neumáticos y ruedas (continuación) Evite la explosión ¡ADVERTENCIA! Los tipos de ruedas y neumáticos de los neumáticos que generalmente se encuentran en estos equipos requieren cuidados especiales al realizar servicios para evitar lesiones graves o la muerte. No infl e los neumáticos por encima de la presión No infl e neumáticos con gases infl amables o con sistemas recomendada.
Página 88 Realización de mantenimiento con seguridad Mantenimiento de las hojas de la cortadora — Evite doblar las hojas. Contribuya a prevenir que las hojas de la cortadora se doblen o rajen evitando el (continuación) contacto con objetos sólidos. Las hojas de la cortadora —...
Página 91 INTRODUCTION The Bush Hog 2310 Series Rotary Mower is designed for medium duty applications such as weed, grass, corn stalks, and light brush to 2" diameter. These mowers are multi spindle with two free-swinging blades on each spindle. Free swinging blades reduce the shock of impact when a stationary object is hit.
Página 92 INTRODUCTION The 2310 Series is shipped from the factory with the Front and Rear Safety Enclosures assembled to the cutter. The enclosures can be Single Row or Double Row chains on the front or Single Row Chains, Double Row Chains or a Metal Band to the rear. These Enclosures should be maintained in good working order and remain attached to the cutter when operating in conditions may present a Thrown Object Hazard to Humans or Livestock.
Página 93 A. Warranty is ONE-YEAR (12 MONTHS) for Seals (After one year, seals are considered to be WEARING PARTS and replacement is the users' responsibility.) B. Users' Gearboxes may be rebuilt by Bush Hog or replaced by new or rebuilt Gearboxes at the option of Bush Hog.
Página 96 ASSEMBLY DO NOT attempt any assembly while the machine is still attached to the shipping bracket and standing in the vertical position. Serious injury or death could occur from the machine falling over. Assembly must be performed with the machine placed on a hard level surface with the shipping bracket removed.
Página 97 ASSEMBLY NOTICE! The 2310 is shipped WITHOUT OIL in the Gearboxes and must be filled before connecting to the Tractor and placed in operation! USE 85W / 140 GEAR OIL FILLER CENTER PLUG GEARBOX WITH VENT VENT LEFT SIDE DIPSTICK RIGHT SIDE PLUG PLUG GEARBOX...
Página 98 ASSEMBLY 3 POINT LIFT MODEL ASSEMBLY 2310 Lift Model FLEX LINK ASSEMBLY 1. Install (2) bushings between the LH and RH Struts using 3/4” x 2-1/2” capscrews and 3/4” lock- nuts at each location. 2. Place the LH and RH Flex Yokes together and align the slotted holes. Place a Bushing into the slotted holes.
Página 99 ASSEMBLY 3 POINT LIFT MODEL ASSEMBLY Spacer 3/4” Locknut RH Mast Bushing Mast Spacer Spacer Bushing 3/4” Locknut 3/4” x 5-1/2” Capscrew 3/4” x 4” Capscrew 5/8” SAE Strut Flatwasher Bushing 5/8” SAE Locknut LH Mast Cat. II Bushing Spacer Bushing Cat.
Página 100 ASSEMBLY TAILWHEEL INSTALLATION 3 POINT LIFT, SEMI MOUNT AND PULL MODELS TAILWHEEL ASSEMBLY 1. Remove the Lift Arm Assemblies from the shipping position. 2. Place the Lift Arm Assembly to the axle assembly as shown n the illustration below and attach with two U-bolts provided.
Página 101 ASSEMBLY PULL MODEL ASSEMBLY PULL MODEL ASSEMBLY (Refer to Illustration on next page) 1. Remove Tongue assembly from shipping position and assemble to lower front holes of the hitch plates (NOTE: be sure the pivot bushings remain inside the pivot tubes of the tongue.) Install the 1” x 8” cap- screws through the tongue pivot tubes and secure with 1”...
Página 102 ASSEMBLY PULL MODEL ASSEMBLY Step 3 Steps 1 & 2 Step 4 Steps 5 Step 6 2310 SERIES 10/19 Assembly Section 3-8 © 2019 Alamo Group Inc.
Página 103 ASSEMBLY TIRES AND WHEELS Before installing any tires and wheels make certain the Cutter is jacked up high enough and is securely sup- ported. When installing laminated or airplane tires, be sure the flat side of the lug nut is against the wheel. There are only three types of tires that can be used on this cutter DO NOT USE ANY OTHER TYPE OF TIRE OR WHEEL, such as automutive tires and rims.
Página 104 ASSEMBLY AXLE HEIGHT CONTROL 2310 Models Axle Working Height is determined by either a mechanical Ratchet Assembly or a single acting Hydraulic Cylinder using Stop Collar adjustments. HYDRAULIC KIT INSTALLATION 1. Install the Hydraulic Cylinder to the machine with the Rod End of the cylinder to the cylinder lug on the axle and the Base End of the cylinder to the mount lug on the base frame.
Página 105 ASSEMBLY DRIVELINE ATTACHMENT DRIVELINE ATTACHMENT - SLIP CLUTCH Before starting assembly, make certain that all paint, dirt and grease are removed from gearbox shaft. To ease assembly, apply a light coat of grease to splines, then assemble. Do not assemble a driveline without a shield. Entanglement in rotating shafts can kill. 1.
Página 108 OPERATION BUSH HOG 2310 SERIES ROTARY WOWER OPERATION INSTRUCTIONS 2310 SERIES 10/19 Operation Section 4-2 © 2019 Alamo Group Inc.
Página 110 OPERATION Tractor Requirements and Capabilities • ASABE approved Roll-Over Protective Structure (ROPS) or ROPS cab and seat belt. • Tractor Safety Devices ......Slow Moving Vehicle (SMV) emblem, lighting, PTO master shield • Tractor Horsepower: -Minimum ........Lift - 70 HP, Pull - 50 HP & Semi-Mount - 50 HP -Maximum........
Página 111 OPERATION 2.2 Tractor Safety Devices If transporting or operating the tractor and implement near a public roadway, the tractor must be equipped with proper warning lighting and a Slow Moving Vehicle (SMV) emblem which are clearly visible from the rear of the unit. Lights and a SMV emblem must be equipped directly on implements if the visibility of the tractor warning signals are obscured.
Página 112 OPERATION 2.5 Drawbar - Pull Type Mower 2.6 Front End Weight 2.7 Power Take Off (PTO) 2310 SERIES 10/19 Operation Section 4-6 © 2019 Alamo Group Inc.
Página 113 OPERATION 2.8 Tire Spacing 3. GETTING ON AND OFF THE TRACTOR 3.1 Boarding the Tractor 2310 SERIES 10/19 Operation Section 4-7 © 2019 Alamo Group Inc.
Página 115 OPERATION 4. STARTING THE TRACTOR 5. CONNECTING THE MOWER TO THE TRACTOR 2310 SERIES 10/19 Operation Section 4-9 © 2019 Alamo Group Inc.
Página 116 OPERATION 5.1 Connecting the Mower - Lift Type and Semi Mount Type 5.2 3-Point Quick Hitch 2310 SERIES 10/19 Operation Section 4-10 © 2019 Alamo Group Inc.
Página 117 OPERATION 5.3 Connecting Mower - Lift Type Quick Hitch 5.4 Safety Tow Chain 2310 SERIES 10/19 Operation Section 4-11 © 2019 Alamo Group Inc.
Página 118 OPERATION 5.5 Connecting the Mower - Pull Type 2310 SERIES 10/19 Operation Section 4-12 © 2019 Alamo Group Inc.
Página 119 OPERATION 6. SETTING THE MOWER 6.1 Setting Mower Height - Lift Type 2310 SERIES 10/19 Operation Section 4-13 © 2019 Alamo Group Inc.
Página 120 OPERATION 6.2 Setting Mowing Height - Pull Type 1. Park the tractor and mower on level ground. Leveling Rod 2. Using the hydraulic cylinder or ratchet attached to the rear axle position the front skid shoes 1” less off the ground of the desired mowing height. (Example: If a 3”...
Página 121 OPERATION 7. DRIVELINE ATTACHMENT 7.1 Driveline Length Check 2310 SERIES 10/19 Operation Section 4-15 © 2019 Alamo Group Inc.
Página 123 OPERATION 7.2 Constant Velocity (CV) Driveline 2310 SERIES 10/19 Operation Section 4-17 © 2019 Alamo Group Inc.
Página 124 OPERATION 8. PRE-OPERATION INSPECTION AND SERVICE 2310 SERIES 10/19 Operation Section 4-18 © 2019 Alamo Group Inc.
Página 125 OPERATION 8.1 Tractor Pre-Operation Inspection/Service 8.2 Mower Pre-Operation Inspection/Service 2310 SERIES 10/19 Operation Section 4-19 © 2019 Alamo Group Inc.
Página 134 OPERATION 9. DRIVING THE TRACTOR AND IMPLEMENT 2310 SERIES 10/19 Operation Section 4-28 © 2019 Alamo Group Inc.
Página 135 OPERATION 9.1 Starting the Tractor 9.2 Brake and Differential Lock Setting 2310 SERIES 10/19 Operation Section 4-29 © 2019 Alamo Group Inc.
Página 136 OPERATION 9.3 Raising the Mower 9.4 Driving the Tractor and Mower 2310 SERIES 10/19 Operation Section 4-30 © 2019 Alamo Group Inc.
Página 137 OPERATION 9.5 Crossing Ditches and Steep Inclines 2310 SERIES 10/19 Operation Section 4-31 © 2019 Alamo Group Inc.
Página 138 OPERATION 10. OPERATING THE TRACTOR AND IMPLEMENT 2310 SERIES 10/19 Operation Section 4-32 © 2019 Alamo Group Inc.
Página 139 OPERATION 10.1 Foreign Debris and Hazards 10.2 Bystanders/Passerby Precautions 2310 SERIES 10/19 Operation Section 4-33 © 2019 Alamo Group Inc.
Página 140 OPERATION 10.3 Engaging the Power Take Off (PTO) 2310 SERIES 10/19 Operation Section 4-34 © 2019 Alamo Group Inc.
Página 141 OPERATION 10.4 PTO RPM and Ground Speed 10.5 Operating the Mower 2310 SERIES 10/19 Operation Section 4-35 © 2019 Alamo Group Inc.
Página 145 OPERATION 10.8 Shutting Down the Implement 11. DISCONNECTING THE MOWER FROM THE TRACTOR 2310 SERIES 10/19 Operation Section 4-39 © 2019 Alamo Group Inc.
Página 147 OPERATION 12. MOWER STORAGE 13. TRANSPORTING THE TRACTOR AND IMPLEMENT 2310 SERIES 10/19 Operation Section 4-41 © 2019 Alamo Group Inc.
Página 149 OPERATION 13.1 Transporting on Public Roadways 2310 SERIES 10/19 Operation Section 4-43 © 2019 Alamo Group Inc.
Página 154 MAINTENANCE HAZARDS WITH MAINTENANCE OF IMPLEMENT 2310 SERIES 10/19 Maintenance Section 5-2 © 2019 Alamo Group Inc.
Página 156 MAINTENANCE 3 POINT LIFT and SEMI MOUNT GREASE POINTS Gearboxes Caster Spindles Wheel Hubs 2310 SERIES 10/19 Maintenance Section 5-4 © 2019 Alamo Group Inc.
Página 157 MAINTENANCE PULL HITCH GREASE POINTS Wheel Hubs 2310 SERIES 10/19 Maintenance Section 5-5 © 2019 Alamo Group Inc.
Página 158 MAINTENANCE GEARBOX The gearboxes should not require additional lubricant unless the box is cracked or a seal is leaking. It is recommended that the oil level be checked after 8 to 10 hours of operation. If additional oil is required follow the steps below under OIL FILL PROCEDURE. Use 85W/140 Gear Oil.
Página 164 MAINTENANCE BLADE HOLDER ASSEMBLY Removal Remove cotter pin and loosen slotted nut on gearbox shaft. Loosen but do not remove the nut until the blade carrier is loosened. Align blade bolt with access hole in top of cutter deck. Use long bar inserted through blade bolt access hole with end against blade bar.

Este manual también es adecuado para:

2310r

Bush Hog 2310 Serie Manual De Instrucciones

Enlaces rápidos

Manuales relacionados para Bush Hog 2310 Serie

Resumen de contenidos para Bush Hog 2310 Serie

Este manual también es adecuado para: