Principles Of Operation - Master Appliance UT-100Si Manual De Instrucciones

Description
Master Models UT-100Si and UT-200Si Ultratorch heat tools are variable temperature, self-
igniting butane powered, multi-function heat tools. They can be operated as soldering irons or
as flameless heat tools just by changing tips.
Temperature is varied by adjusting the gas control lever.
Hot Air Exhaust
Hot Air Exhaust Opening

Principles of Operation

This product uses a catalytic gas reaction sys-
tem. The special catalyst contained in the tip is
preheated with a butane flame. The preheated
flame is extinguished when the shutter is closed
over the ignition vent.
Butane gas continues to flow over the preheated
catalyst generating infrared heat which is either
conducted through the soldering iron tip or
passed through the heat tip as hot gas.
Fill with Ultratane Butane
Unit operates on butane gas and creates infared heat effectively
by the use of a catalyst. Use only Master Ultratane butane with
your Ultratorch. Make sure on/off lever is in "off" position before
filling. To fill, press nozzle of butane can down onto refill opening.
Unit is full when gas overflows refill opening. Check window for
fuel level.
Knurled Nut
Ignition Vent
Tip Housing
Shutter Lever "On/Off" Lever
Chrome Plated
Iron Plated
Tinned
Gas Control
Lever
Fuel Window
Copper Base
Hot Air Vent Catalyst
Refill Opening
Evaporated
Gas