Publicidad
Idiomas disponibles
Idiomas disponibles
To prepare your product for long-term
storage
1. Disassemble and clean the saw chain and the
groove in the guide bar.
CAUTION: If the saw chain and guide
bar are not cleaned, they can become
rigid or blocked.
Technical data
Engine
Cylinder displacement, cu.in/cm3
Idle speed, rpm
Maximum engine power acc. to ISO 8893, kW/hp @ rpm
1
Ignition system
Spark plug
Electrode gap, in/mm
Fuel and lubrication system
Fuel tank capacity, US pint/liter
Oil tank capacity, US pint/liter
Type of oil pump
Weight
Weight, lb/kg
Saw chain/guide bar
Type of drive sprocket/number of teeth
Saw chain speed at 133% of maximum engine power
speed, ft/s / m/s.
Recommended cutting equipment
A specific chainsaw model has to be evaluated with the
cutting equipment to be recommended and fulfill the
requirements in ANSI B175.1-2012 (Internal Combustion
Engine-Powered Hand-Held Chainsaws - Safety and
Environmental Requirements) and Canadian Standards
1
Always use the recommended spark plug type! Use of the wrong spark plug can damage the piston/cylinder.
1284 - 002 - 14.10.2019
2. Attach the transportation guard.
3. Clean the product. Refer to
on page 19 for instructions.
4. Do a complete servicing of the product.
Technical data
RedMaxGZ381
2.49/40.9
2900
1.8/2.4 @ 9000
NGK BPMR 7A/Champion RCJ 7Y/Husqvarna PR 17Y
0.02/0.5
0.78/0.37
0.53/0.25
Fixed
9.5/4.3
Spur/7
75.5/23.0
Accessories
CSA Z62.1-15 (Chainsaws) and CSA Z62.3-11 (R2016)
(Chainsaw kickback).
Chainsaw model RedMax GZ381 met the safety
requirements in ANSI B175.1-2012 and Canadian
Standards Association CSA Z62.1-15 (Chainsaws) and
CSA Z62.3-11 (R2016) (Chainsaw kickback), when
Maintenance schedule
27
Publicidad
