Descargar Imprimir esta página

Greencut GTC190X Manual De Instrucciones página 59

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

ATTACHING THE CLAMPS
1.
Secure the cables to the handlebar with the supplied clamps so that the
wiring does not become deformed.
TRANSMISSION ENGAGEMENT
FOLLOW DETAILED INSTRUCTIONS IN QR CODE (explanatory video)
FIXING THE KNIVES
1.
Slide a blade to the end of the shaft, insert a type R pin and secure.
2.
Slide the outer sheet to the end, insert the type R locking pin and secure.
3.
Perform the same procedure for the opposite side.
PUT ON THE PROTECTORS
1.
Place the mudguard on both sides with the supplied nuts and bolts.
PRODUCT USE
INSPECTION BEFORE STARTING
1.
Make sure the safety cover is in place and that all nuts and bolts are secure.
1
59
1
2
EN

Publicidad

loading