Publicidad
Idiomas disponibles
Idiomas disponibles
16
It is recommended that the appliance be allowed to settle for at least 4 hours before connecting
the electrical power supply, so that the compressor fluid feed is correct.
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation, observe
the installation recommendations provided.
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with walls
or with any hot element (compressor, condenser). Observe the installation recommendations.
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
Check that electrical sockets remain accessible when the appliance is installed.
▪
When positioning the appliance, ensure the supply cord is not trapped or damaged.
▪
This refrigerating appliance is not intended to be used as a built-in appliance
▪
Your device is not designed to be placed in a garage, basement, or similar location.
Power saving
To limit the electricity consumption of your appliance:
▪
Install it in an appropriate place (see "Installing your appliance")
▪
Leave the doors open as little time as possible.
▪
To ensure that the appliance operates properly, clean the condenser regularly (see
"Routine servicing of your appliance").
▪
Regularly inspect the door seals and ensure that they are still closing properly. If this is
not the case, contact your after-sales service.
Recommendation combination:
The following combination of shelves is recommended for energy to be used as efficiently as
possible by the refrigeration unit.
Trouble shooting
Any electrical work should be carried out by a qualified and skilled technician.
The appliance should be repaired by an accredited repair center, using only manufacturer's
original spare parts.
The appliance is designed for home use only. The manufacturer declines any liability whatsoever
in the case of other use
Aesthetic and functional spare parts in accordance with REGULATION (EU) 2019/2019 (Annex II,
point 3.), are made available to professional repairers and end users for a period of 7 years or 10
years (List in Annex II, point 3.a.1 and 3.a.2) from the time the last unit of the model is placed on
the market.
The list of spare parts and the procedure for ordering them (professional access / special access)
are available on the following website: www.interfroidservices.fr or by post at the following address:
FRIO - Interfroid Services, 143 Bd Pierre Lefaucheux - 72230 ARNAGE For other functional spare
parts not specified in EU regulation 2019/2019, they are available for a period of 10 years.
The manufacturer's warranty is 1 year for functional parts.
Publicidad
