Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
4. How to connect the Media Player
4.1 Connecting to your Computer
A.
Turn on your computer.
B.
Connect the powersupply to the CMED3PRO and to the power outlet.
C.
Connect the USB Cable to the CMED3PRO and your computer.
The computer will automatically detect and configure the device, assign new drive letter(s), and
then use it as a mass storage device. (Your drive is pre-formatted in FAT32 file system).
You can now add movies,music,photo's, etc. to the CMED3PRO.
Disconnect the CMED3PRO from your computer
A.
Single-click the "Safe Removal" icon on the systemtray.
B.
Select "Stop USB Mass Storage Device" when prompted.
C.
Wait for the message "Safe to remove Hardware".
D.
Disconnect the USB cable.
4.2 Connection to your Television
The Conceptronic CMED3PRO can be used with a television or with a monitor.
You can connect to the TV or monitor with the following connections:
- Composite
- Component
- S-Video
- VGA
Please check the manual of your TV/Monitor to select to correct input channel to display the
video output of the CMED3PRO.
Use the OUTPUT button on your remote control to change the VIDEO output signal of the
CMED3PRO.
For the sound output of the Conceptronic CMED3PRO, you can use the following connections:
- Analog RCA Jacks (Left/right)
- Digital Coaxial
- Digital Optical
For the best audio experience, connect the Conceptronic CMED3PRO with one of the digital
audio outputs to your surround sound system.
A.
Plug the power adapter into a working electrical outlet and connect the other end of the
adapter to the Media Player.
B.
Connect one of the supplied video cables (Composite, Scart, S-VIDEO) to the Media Player and to
your TV / Monitor.
C.
Turn on the Media Player wih the Power Button on the front, or the Power Button on the remote
control. The Power Button & Menu Button on front of the Media Player will turn blue when the
device is turned on.
23
A
Publicidad
