Conceptronic CMED3PRO Manual De Instrucciones página 30

ENGLISH
Music Setup page
Repeat
Auto Start
Main Page
Slideshow Setup page
Folder Repeat
Interval Time
Transition
Main Page
Preferences Setup page
TV Display
Tv Type
Video Output
OSD Language
Configuration
Main Page
7. Tips & Troubleshooting
Use the tips below for troubleshooting when your CMED3PRO is not working properly:
The Power LED doesn't light up
• The power supply is not connected to the CMED3PRO. Reconnect the power supply to the
CMED3PRO.
There is no activity on the display.
• The CMED3PRO is in standby state. Press the
• The Wrong input source on your TV is selected. Change the input source.
• The Wrong video system selected. Press the OUTPUT button on your remote control to switch video
system.
•
The Video cable is not connected properly. Check if the Video Cable is connected correctly.
There is no sound
• The Audio cable is not connected properly. Make sure the cable is connected correctly to your TV or
amplifier.
: Set Repeat mode.
One / Off / All / Shuffle
: Auto start playback when a music
file is highlighted in the menu.
: Return to the Setup Menu
: Repeat the contents of a folder.
On / Off / Shuffle
: Set the interval time of the
slideshow.
: Set a standard transition for the
slideshow.
: Return to the Setup Menu
: Set your TV Display size.
: Set your TV Type: PAL / NTSC.
: Select the correct video output
for the connected TV / Monitor.
: Set the OSD Language of the
Media Player.
: Reset the Configuration to the
factory default settings.
: Return to the Setup Menu
button on the remote control to activate it.
30