Brinkmann 810-6550-S Manual Del Usuario página 28

Step 17
Remove igniter cap and insert
a battery with the end of battery
toward igniter cap.
Ensure spring is in place inside
igniter cap. Replace igniter cap and
make sure the igniter is working
properly (Figure 1).
Place two batteries into the LED
light battery compartment, and slide
compartment into the sleeve on the
inside left panel. (Figure 2).
Step 18
Open the right side table lid, insert
the sear burner grate.
27
Figure 1
Figure 2
Sleeve
Igniter Cap
+
- Battery
LED Battery
Compartment