Device Description; Technical Data; Noise And Vibration Information - Bruder Mannesmann Werkzeuge 01728 Manual De Instrucciones

Device description

8. Square holder
9. Ventilation slots
10. Switch clockwise/counter-clockwise rotation
11. Handle
12. Power cord
13. Operating switch
14. Socket wrench inserts 17-19-21-22 mm

Technical data

Nominal voltage:
Nominal power:
Idle speed:
Max. torque:
Clockwise rotation: 100 Nm
Counter-clockwise: 320 Nm
Drive square:
Protection class:
Sound pressure level:
(Measurement uncertainty K = 3 dB)
Sound power level:
(Measurement uncertainty K = 3 dB)
Vibration specifications:
(Measurement uncertainty K = 1.5 m/s²)
During use, it is imperative to wear protective goggles and hearing
protection!

Noise and vibration information

Measured values determined according EN 60745
- The vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745 and may be used to compare one
tool with another.
- The given vibration emission level may be used for the initial estimation of the real exposure.
- The vibration emission level will vary because of the ways in which a power tool can be used
and may increase above the level given in this information sheet.
- Try to keep the exposure as low as possible. To reduce the vibration emission level the user
should wear working-gloves and use the machine for limited time. All parts of working cycles
have to be considered (including the time the power tool is switched off, and the time, when
the power tool is running under no-load condition).
230 V~ / 50 Hz
450 W
3600 rpm
12.5 mm (1/2")
/ II
88,32 dB(A)
99,32 dB(A)
8,652 m/s²
13