Kohler K-2368 Guia De Instalacion página 3

Drain Body
Foam Gasket
(supplied with lavatory)
O-Ring
(supplied with lavatory)
Roll the O-ring onto the
drain body and seat into the
underside of the lavatory.
Washer
1. Install the Lavatory
CAUTION: Risk of product damage. Do not overtighten
drain connection.
CAUTION: Risk of product damage. Ensure the foam gasket
provided with the lavatory is properly positioned under the
drain flange.
IMPORTANT! The drain must be installed using the foam gasket
and O-ring provided with the lavatory. Do not use the gasket
supplied with the drain.
Position the lavatory on the countertop at the installation location.
Trace the lavatory drain hole onto the countertop.
Remove the lavatory and set aside.
Drill a 1-5/8" (4.1 cm) hole, at the marked location.
NOTE: For K-2369 only: The white foam pad provided may be
placed on the countertop to enhance the color of the lavatory. If you
are planning to install your lavatory with the foam pad, use care to
not damage or mark-up the pad.
Kohler Co.
K-2369 Only:
Optional
Foam Pad
1-5/8" (4.1 cm)
Drain Hole
Discard gasket
supplied with the drain.
Nut
3 1095015-2-C