Publicidad
Idiomas disponibles
Idiomas disponibles
O
PERATING DVD
Repeat A-B Playback
You can repeat playback between A and B on a disc.
1
During playback, press [MODE] repeatedly until
"
" appears.
A B
A B
2
Press [OK] at your desired starting point (A).
3
Press [OK] at your desired ending point (B).
• Point B should be in the same title or track as point A.
• Within a few seconds, the section A-B will begin to
play back repeatedly.
4
To cancel repeat A-B playback, press [MODE]
repeatedly until "
A B
A B
Press [OK] so "OFF" appears.
Note:
• Repeat setting (except "ALL") will be cleared when moving to
another title or chapter, track.
• During programmed playback, repeat setting will be
effective for the tracks in the program.
• Repeat playback or repeat A-B playback may not available
with some discs.
• Repeat A-B playback does not function during other repeat mode.
• To cancel point A, press [CLEAR] at step 2 in
"Repeat A-B Playback".
• Stopping playback will cancel repeat A-B playback.
Random Playback
CD
This function shuffles the playing order of tracks instead of playback in the sequence.
1
In stop mode, press [MODE] repeatedly until "RANDOM"
menu appears.
2
Press [PLAY B] to start random playback.
Note:
• To repeat the current track in the random mode, follow the
steps 1 and 2 in "Repeat Playback" on page 41 and select
"
TRACK".
• To repeat the entire random selections, follow the steps 1
and 2 in "Repeat Playback" on page 41 and select "
42
42
EN
EN
A B
A B
OFF
( A-B REPEAT )
A B
A B
A-
( A-B REPEAT )
A B
A B
A-B
( A-B REPEAT )
" appears.
RANDOM
CD-DA
TOTAL 0:45:55
RANDOM PROGRAM
--no indication--
PLAY
Programmed Playback
CD
You may determine the order in which tracks will play back.
1
In stop mode, press [MODE] repeatedly until
"PROGRAM" menu appears.
2
Use [Cursor K / L] to select a desired track, then press
[OK] to store.
• Additional tracks may be on other screens. Use
[Cursor K / L] to go on to the next / previous pages.
• Repeat this step until you have selected all the tracks
you wish to play back in the program.
• Up to 99 tracks can be ordered.
• If 8 or more tracks were in a program, use
[SKIP H / G] to see all the tracks.
3
Press [PLAY B] to start programmed playback.
Note:
• Press [CLEAR] to erase the last track in the program if you
make an error.
• To erase all programmed tracks at once, select "ALL CLEAR"
and press [OK] at step 2.
• While a program is being played back, [STOP C] works as
follows:
- Pressing [STOP C] once: The track will be in the resume
standby mode. Next time you press [PLAY B], the playback
will resume from the point where it is stopped in the
programmed playback.
- Pressing [STOP C] twice: Resume mode will be canceled.
Next time you press [PLAY B], playback will restart
from the first track in the original order. However, your
programmed playback can be restarted when you follow
the above steps. (Your programs are still stored until either
the disc is ejected or the unit is turned off.)
- On some discs, [STOP C] will not work while the resume
message appears. Please wait until the message disappears.
• To repeat the current track in the program, follow the steps 1
and 2 in "Repeat Playback" on page 41 and select "TRACK".
• To repeat the entire program, follow the steps 1 and 2 in
"Repeat Playback" on page 41 and select "ALL".
• Turning off the unit or ejecting the disc will erase the
program.
• You cannot use [the Number buttons] to select another
track during programmed playback. Use [SKIP H / G] to
select other tracks in the program.
• You cannot combine random playback with programmed
playback.
• You cannot alter a programmed order during playback.
• You can start programmed playback only while in
"PROGRAM" menu.
ALL".
PROGRAM
CD-DA
TOTAL
0:00:00
T
1 3:31
T
2 4:28
T
3 4:19
T
4 3:58
T
5 4:12
T
6 4:02
T
7 3:55
ENTER/OK
1/ 1
1/ 3
PLAY
T
1 3:31
CLEAR
PROGRAM
CD-DA
TOTAL
0:08:22
T
4
3:58
T
15 3:18
T
16
4:24
T 16 4:24
ALL CLEAR
ENTER/OK
3/ 3
1/ 1
PLAY
T
16 4:24
CLEAR
Publicidad
