CORBERO CC510GB90X Manual Del Usuario página 24

G
B
Gas Connection
WARNING: Before starting any work related with gas installation, turn off gas
supply. Risk of explosion.
Please operate your oven in dry atmosphere.
1. Before your appliance is connected to the gas supply, ensure that the gas
category and pressure specifications shown in the data plate corresponds
with your gas supply. If necessary call authorized service for adjusting to gas
category.
2. This appliance shall be installed in accordance with the regulations in
force and only used in a well ventilated space. Read the instructions before
installing or using this appliance. In the interest of safety this appliances must
be installed and / or serviced by a competent person as stated in the gas
safety regulations current editions.
3. The appliance must not be installed in a room without a window or other
controllable opening. If is installed in a room without a door which opens
directly to the outside, a permanent opening is required. The air circulation
should be 2 m³/h per kW of burners.
4. The gas connection should be performed from the right or left. For
this reason, change the hose nozzle, plug and the seals.
5. Please use flexible hose for gas connection.
6. If you make a connection with a flexible metal hose, locate a seal
between the main gas pipes.
7. The inner diameter of the flexible hose, which the butane hose nozzle is
connected, should be 6mm for the house-type gas tubes. The inner diameter
of the flexible hose, which the natural hose nozzle is connected, should be
15mm.The hose should tightly be fitted to the hose nozzle by squeezing with
a clamp.
8. The hose should be replaced before its last expiry date.
9. The gas bottle diameter shall be max. 300 mm.
10. CAUTION: Make the oven connection to the gas inlet valve, the hose
length must be short and be sure that there is no leakage. The hose used
should not be longer than 125 cm for safety.
11. When placing your oven to its location, ensure that it is at the counter level.
24