SEVERIN VKS 8808 Instrucciones De Uso página 26

• If necessary, the door hinge can be
switched from right to left.
• Warning! Before carrying out any work
on the appliance, always disconnect the
power plug from the mains.
• To avoid personal injury and material dam-
age, carry out the shift of the door hinge
with two people.
• We recommend that the door stop only be
changed by qualified persons.
• Before you start, it is fundamental that you:
ū Always pay attention to the number of
washers on the trunnion and screws.
ū Always align the doors so that they close
tightly.
a) Unscrew the two screws q which secure
the appliance top w from behind.
b) Take off the appliance top w and put it aside.
c) While securing the door, unscrew the 5
screws e & r which hold the upper door
hinge t. Remove both door and hinge.
d) Loosen the screw s at the bottom right of
the door, which holds the entry a for the
journal, and remove both. Put the door
aside in a safe place.
e) Tilt the device slightly backwards and unscrew
the adjustable front feet y of the appliance.
f) Unscrew the screws u which hold the
bottom door hinge i.
g) Loosen the screws d which hold the door
handle f and take the blind plugs g out of
the drill holes on the right side of the door.
a) Refer to drawing B when unscrewing the
journal of the lower hinge i from the plate.
b) Turn the plate so that its underside is facing
upwards.
c) Then, replace the journal and secure it with
the nut. The newly configured lower door
hinge receives the number o.
a) Using the screws u, attach the lower door
hinge o to the bottom left side of the appli-
ance.
b) Screw the adjustable front feet y back on
the appliance.
c) Put the entry a for the journal into the drill
hole on the bottom left of the door and
secure it with the screw s.
d) Put the door onto the journal of the bottom
door hinge o and press it onto the appliance.
e) While securing the door, attach the upper
door hinge t with the screws e & r on
the top left side of the appliance, in a way
that ensures that the upper journal slides
into the aperture on the door.
f) Using the screws d, attach the door handle
f on the right side of the door. Put the
blind plugs g into the drill holes on the left
side of the door.
g) Put on the appliance top w and secure it
from behind with the two screws q.
Screw
Appliance top
Step A
Upper bolt
Upper screw
Upper door
hinge
Adjustable
foot
Lower bolt
Lower right-
hand hinge
Step B
Lower left-
hand hinge
Entry for
journal
Screw for
Step C
entry
Screws for
door handle
Door handle
Blind plug
- 26 -
q
w
e
r
t
y
u
i
o
a
s
d
f
g