Descargar Imprimir esta página

Sony VPL-PX31 Manual De Instrucciones página 26

Ocultar thumbs Ver también para VPL-PX31:

Publicidad

Idiomas disponibles

Idiomas disponibles

The INPUT SETTING Menu / The SET SETTING Menu
Since the data is recalled from the preset memory
about the following signals, you can use these preset
data by adjusting SIZE H. Make fine adjustment by
adjusting SHIFT.
Signal
Memory No.
Super Mac-2
23
SGI-1
23
Macintosh 19"
25
Macintosh 21"
28
Sony News
36
PC-9821
36
1280 × 1024
WS Sunmicro
37
Note
When the aspect ratio of input signal is other than 4:3,
a part of the screen is displayed in black.
The SET SETTING Menu
The SET SETTING menu is used for changing the
settings of the projector.
SET SETTING
STATUS:
ON
INPUT-A:
COMPUTER
AUTO INPUT SEL: OFF
LANGUAGE:
ENGLISH
SPEAKER:
ON
POWER SAVING: OFF
SIRCS RECEIVER: FRONT&REAR
Operation
1. Select an item
Use the M or m key to select the item, then press the
, or ENTER key.
2. Change the setting
Press the M or m key to change the setting.
To restore the original screen, press the ENTER or <
key.
26
(GB)
SIZE H
1312
1320
1328
1456
1708
1600
1664
INPUT-A
STATUS (on-screen display)
Sets up the on-screen display.
ON: Shows all of the on-screen displays.
OFF: Turns off the on-screen displays except for the
menus, a message when turning off the power,
and warning messages.
For details on the warning messages, see page 35 (GB).
INPUT-A
Selects the computer, component, DTV YP
DTV GBR signal input from the 5BNC connector.
Note
If the setting is not correct, "Please check INPUT-A
setting." appears on the screen and the color of the
picture becomes strange or the picture is not
displayed.
AUTO INPUT SEL
When set to ON, the projector detects input signals in
the following order: INPUT-A/INPUT-B/VIDEO/S-
VIDEO. It indicates the input channel when the power
is turned on or the INPUT key is pressed.
LANGUAGE
Selects the language used in the menu and on-screen
displays.
Available languages are: English, French, German,
Italian, Spanish, Japanese and Chinese.
SPEAKER
Set to OFF to cut off the sound of the internal
speakers. When set to OFF, "SPEAKER OFF"
appears on the screen when you turn on the power.
P
or
B
R

Publicidad

loading

Este manual también es adecuado para:

Vpl-px21