Menu Setting; Setting Date&Time - Panacom PA-7580 Manual Del Usuario

MENU SETTING

Press the SET button to enter the setting status. The LCD will display
"SET 1 DATE", press UP or DOWN button to review other settings.
Press SET again to modify this setting and press SET again to save
it and go to next setting.
a) Press SET to enter and save
b) Press UP OR DOWN to change the setting values,
c) Press the button DEL to exit.
Setting Date&Time
1) Press SET button to enter into the menu
2) The LCD will show: "SET 1 DATE"
3) Press SET again the LCD will flash year "2004".
4) Use UP or DOWN button to adjust the correct Year / Month /Day/
Hour/Minute.
5) Then press SET button to confirm and save the correct
Date&Time.
Setting local area code
After Setting the Date&Ttime, the LCD will show "SET 2 CODE"
1) Press SET to enter into the menu.
2) The LCD will show: "CODE - - - - -"
3) Use UP or DOWN button to set the area code digits
4) Then press SET button to confirm the area code and fo to next
setting.
Setting PABX code
After setting the local area code, the LCD will show "SET 3
PCODE"
1) Press SET to enter into the menu
2) The LCD will show: "PCODE –"
3) Use UP or DOWN button go to set the PABX code.
4) Then press SET button to confirm and go to next setting.
Note:
After setting the PCODE, when calling back the incoming calls, the
phone will dial out the numbers with the PABX Code automatically.
Setting AUTO IP
After setting PABX Code, the LCD will show "SET 4 AUTO IP"
1) Press SET to enter into the menu
2) The LCD will show: "AUTO IP OFF –"
3) Use UP or DOWN button to turn on the setting.
Pg. 4