Panacom PA-7580 Manual Del Usuario página 5

4) Press SET button and the LCD will display: "INPUT CODE"
5) Input the IP Nº or IP Card Nº and its password.
6) Then press SET button to confirm and go to next setting.
Note:
After setting auto IP function, when calling back or predialing, if the
first digit of the number is "0", the phone will dial out the IP Nº first
automatically.
Setting Alert Time
After setting AUTO IP, the LCD will show "SET 5 ALERT"
1) Press SET to enter into the menu
2) The LCD will show: "1 00-00 OFF" (First alarm,HH-MM,off/on),
3) Use UP or DOWN button to choose the first/second/third alarm
press SET to enter the setting.
4) .Press UP or DOWN to adjust the alarm time (HH-MM).
5) Press the SET to confirm and go to next setting.
Note:
When the alarm is on, it will keep on ringing for 1 minute. Press any
button to stop ringing.
The first and second alarm is one-off settting. The third one is per-
manent.
Setting LCD Brightness
After setting the alert, the LCD will show: "SET 6 LCD".
1) Press SET to enter into the menu.
The LCD will show: "LCD 3" (there are 5 levels)
2) Use UP or DOWN button to change the LCD brightness.
3) Press SET to confirm and press DEL to exit.
FEATURES
Hands Free function
Press speakerphone button for dialing numbers and conversation.
When new call comes, press speakerphone to start conversation,
press it again to end the call.
Review Caller List
Press UP or DOWN button to view the calls backward/forward. After
it show the last number recorded it will display: "---- END----".
When receiving incoming calls, the LCD will display "NEW" icon.
When the incoming call number is repeated, the LCD will display
"REP" icon.
Pg. 5