Important Safety Instructions
SAVE THESE INSTRUCTIONS
This manual contains instructions and warnings that should be followed during the installation,
operation and storage of all Tripp Lite UPS Systems. Failure to heed these warnings may affect
your warranty.
Statement of Intended Use
Tripp Lite Medical-Grade UPS Systems are intended to support and protect non-medical and
medical computer equipment and medical devices that require leakage current reduction, surge
protection, voltage regulation, line noise filtering and battery backup during power outages and
generator testing, both inside and outside patient care areas. Tripp Lite Medical-Grade UPS Systems
come with hospital-grade plugs and receptacles that reduce leakage to below 100μA.
Product Information
AC Input Voltage
AC Input Voltage Range
Input Amp(s)
Output Amp
Rated Power (VA/Watts)
Frequency
No. of Phases
Class Type
Plug/Connector Type
Operation
AC Input Protection (Qty./type/rating)
Max Leakage Current (uA)
Weight
Known Contraindication
UPS Location Warnings
Relevant Symbols
Denotes that information in the manual should be reviewed before use.
Used to signal a warning that a statement is particularly important and could pose a safety
risk.
Warning—Dangerous Voltage
Denotes general warning sign
Refer to Instruction Manual/Booklet
18-06-068-933608.indb 2
SMART700HGL
120
81–143
5.5
5.8
700VA/450W
60 Hz
Single
Class I
C14 Inlet Dongle, 6 in.
Continuous
Input breaker
(2 x 10A), thermal
Less than 100uA
33.7 lb. (15.3 kg)
None
No sitting
No stepping on surface
No pushing
2
SMART1200XLHGL
120
81–143
9.2
6.25
1000VA/750W
60 Hz
Single
Class I
C14 Inlet Dongle, 6 in.
Continuous
Input breaker
(2 x 15A), thermal
Less than 100uA
33.6 lb. (15.2 kg)
None
6/22/2018 4:56:25 PM