Cameo CLF4T Manual De Usuario página 12

DMX TERMINATORS (TERMINATING RESISTORS)
To prevent system errors, the last device in a DMX chain needs to be equipped with a terminating resistor (120 ohm, 1/4 Watt).
3-pin XLR connector with a terminating resistor: K3DMXT3
5-pin XLR connector with a terminating resistor: K3DMXT5
Pin Assignment
3-pin XLR connector:
1
3
2
DMX ADAPTER
The combination of DMX devices with 3-pin connectors and DMX devices with 5-pin connectors in a DMX chain is possible with suitable
adapters.
Pin Assignment
DMX Adapter 5-pin XLR male to 3-pin XLR female: K3DGF0020
Pins 4 and 5 are not used.
Pin Assignment
DMX Adapter 3-pin XLR male to 5-pin XLR female: K3DHM0020
Pins 4 and 5 are not used.
TECHNICAL DATA
Product number:
Product type:
Type:
Colour spectrum:
CRI:
Number of LEDs:
LED type:
LED PWM frequency:
Beam angle:
DMX input:
DMX output:
DMX mode:
DMX functions:
Control:
Standalone functions:
Operating controls:
Display elements:
Operating voltage:
Power consumption:
Luminous flux:
Power supply connection:
Fuse:
12
CLF4T
LED spotlight
Fresnel spotlight with zoom function
Tungsten (warm white) 3200 K
95
1
570 W
800 Hz, 1200 Hz, 2000 Hz, 3600 Hz, 12 kHz, 25
kHz (adjustable)
14° to 43° (field 23° to 57°)
5-pin male XLR
5-pin female XLR
1-channel, 2-channel 1, 2-channel 2, 3-channel,
4-channel, 5-channel
Dimmer, dimmer fine, strobe, dimmer curve, dim-
mer response, PWM frequency, fan setting
DMX512, RDM-enabled
Dimmer, strobe, master/slave
DIM/MENU rotary-push encoder, manual zoom
OLED display
100–240 V AC/50–60 Hz
473 W
30,000 lm
INPUT: TRUE1 compatible
OUTPUT: TRUE1 compatible (max. 8.1 A)
T6, 3A/250 V (5 x 20 mm)
5-pin XLR connector:
5
4
3
2
1
CLF4D
LED spotlight
Fresnel spotlight with zoom function
Daylight 5500 K
96
1
570 W
800 Hz, 1200 Hz, 2000 Hz, 3600 Hz, 12 kHz, 25
kHz (adjustable)
14° to 43° (field 23° to 57°)
5-pin male XLR
5-pin female XLR
1-channel, 2-channel 1, 2-channel 2, 3-channel,
4-channel, 5-channel
Dimmer, dimmer fine, strobe, dimmer curve, dim-
mer response, PWM frequency, fan setting
DMX512, RDM-enabled
Dimmer, strobe, master/slave
DIM/MENU rotary-push encoder, manual zoom
OLED display
100–240 V AC/50–60 Hz
478 W
30,000 lm
INPUT: TRUE1 compatible
OUTPUT: TRUE1 compatible (max. 8.1 A)
T6, 3A/250 V (5 x 20 mm)