Cameo CLF4T Manual De Usuario página 4

The warning triangle with lightning symbol indicates dangerous uninsulated voltage inside the unit, which may cause an
electrical shock.
The warning triangle with exclamation mark indicates important operating and maintenance instructions.
TWarning! This symbol indicates a hot surface. Certain parts of the housing can become hot during operation. After use, wait
for a cool-down period of at least 10 minutes before handling or transporting the device.
Warning! This device is designed for use below 2000 metres in altitude.
Warning! This product is not intended for use in tropical climates.
Caution! Intense LED light source! Risk of eye damage. Do not look into the light source.
CAUTION! IMPORTANT INFORMATION ABOUT LIGHTING PRODUCTS!
1. The product has been developed for professional use in the field of event technology and is not suitable as household lighting.
2. Do not stare, even temporarily, directly into the light beam.
3. Do not look at the beam directly with optical instruments such as magnifiers.
4. Stroboscope effects may cause epileptic seizures in sensitive people! People with epilepsy should definitely avoid places where
strobes are used.
INTRODUCTION
CONTROL FUNCTIONS
1-channel, 2-channel 1, 2-channel 2, 3-channel, 4-channel and 5-channel DMX-functions
Master/Slave operation
Standalone functions
FEATURES
14-43° beam angle, manual zoom. 250 mm Fresnel lens. PWM frequency adjustable (flicker free). DMX-512 control. RDM-enabled. Manual
control. Quicklight function. 4 dimmer curves. 16-bit dimming. Master/Slave operation. Extremely quiet operation due to combined heat pipe
and fan cooling. Operating voltage 100-240 V AC / 50-60 Hz. Mounting bracket, filter frame and 8-position barn doors included.
CLF4T
1 x high-power 570 W Tungsten LED (warm white). Power consumption 473 W
CLF4D
1 x high-power 570 W daylight LED. Power consumption 478 W
Both spotlights feature the RDM standard (remote device management). Remote device management allows the user to view status and
configuration of RDM terminals via an RDM-capable controller.
4
CAUTION:
To reduce the risk of electric shock, do not remove cover (or back). There are no user serviceable parts
inside. Maintenance and repairs should be exclusively carried out by qualified service personnel.