Parkside PDEXS 150 C2 Traduccion Del Manual De Instrucciones Originale página 45

PNEUMATIC ORBITAL SANDER
PDEXS 150 C2
Introduction
Congratulations on the purchase of your new ap-
pliance. You have selected a high-quality product.
The operating instructions are part of this product.
They contain important information about safety,
usage and disposal. Before using the product, please
familiarise yourself with all operating and safety
instructions. Use the product only as described and
for the specified areas of application. Please also
pass on these operating instructions to any future
owner.
Intended use
This compressed air-powered random orbital sander
is suitable for sanding, polishing and for the prepa-
ration of various surfaces. Any other usage of or
modification to the appliance is deemed to be
improper and carries a significant risk of accidents.
The manufacturer accepts no responsibility for
damage(s) resulting from improper usage. This
appliance in intended only for domestic use.
Symbols on the compressed air tool
WARNING!
│ GB │ MT
■ 42
Read the instruction
manual before use.
Wearing of protec-
tive gloves and safety
clothing is recom-
mended.
Always wear eye
protection when using
or maintaining the
sander.
Always wear respira-
tory protection in the
presence of dust.
Always wear hearing
protection.
Features
Housing
Blocking device
Trigger
Handle
Connector nipple
Speed controller
Spindle lock
Eccentric spindle with sanding disc socket
Sanding disc
Protective cuff
Sandpaper disc
Oil container
Teflon tape
Package contents
1 pneumatic orbital sander
1m Teflon tape
1 oil container
1 connector nipple 6.35 mm (1/4")
1 sanding disc Ø 150 mm (with Velcro)
5 sanding sheets (P60/P80/P100/P120/P150)
1 operating manual
Technical data
Rated speed:
Rated air pressure:
Sanding disc:
Weight (without accessories)
Oil daily
Rotation direction
max. 10000 rpm
max. 6.3 bar
Ø 150 mm
approx. 1.65 kg
PDEXS 150 C2