Rewa Mirabello MIR 30 Instrucciones Y Garantía página 22

EN Operating Instructions
Contents
I. IMPORTANT SAFETY REGULATIONS
II. PRODUCT SPECIFICATIONS
II.a
II.b
III. UNPACKING AND PRELIMINARY CHECKS
IV. WHERE TO POSITION THE AQUARIUM
V. INSTALLING AND SWITCHING ON THE AQUARIUM
V.a
EN
V.b
V.c
V.d
V.e
V.f
V.g
V.h
V.i
V.l
V.m
VI. OPERATING AND CLEANING
VII. MAINTENANCE
VII.a Replacing the filter cartridges
VII.b Cleaning the rotor
VII.c Maintenance of the ventilation system
VII.d Replacement of heater and pump filter
VII.e LED light replacemnet
VIII. TROUBLESHOOTING
IX. CORRECT DISPOSAL OF THE PRODUCT
X. WARRANTY
XI. SPARE PARTS AND ACCESSORIES
I. IMPORTANT SAFETY REGULATIONS
This appliance is intended for use as a fresh or marine water aquarium in homes. Any other use is not permitted and therefore
the manufacturer shall not be held liable. NEWA Mirabello complies with safety regulations EN60598-2-11, whereas the pump
complies with the EN60335-2-41 standard. The heater and the air-pump (when provided present) comply with the EN60335-2-
55 standard. The aquarium has been designed and made in order to guarantee safe use throughout its life cycle. Nevertheless,
improper use of the aquarium (use not compliant with the provisions of this manual) may cause damage to the aquarium and
compromise user safety.
WARNING: the symbol on the label of NEWA Mirabello indicates that you must thoroughly read this operating instruction
manual before starting up, operating or carrying out any maintenance operations on the appliance.
WARNING: during installation and maintenance, disconnect the aquarium and all its accessories from the electrical mains. Do
not connect the aquarium to power sockets unless it is completely filled with water.
To avoid any kind of accident, carefully follow the simplest safety provisions and the following warnings:
1) CAUTION: The apparatus can be used by children of 8 years old and over (3 years old for the heater
and air pump) and above and persons with reduced physical, sensory or mental capabilities or lack of
Component names
Technical data
Cleaning the tank
Installation of NEWA Mirafilter
Filtering
Activation of filtering cartridges
Pump-filter customization
Pumping capacity regulation
Aeration system
Adjusting the heater
Switching -on the aquarium
Lighting and timer programming
Filtering enhancement (MIR 70 aquarium)
page 22
page 24
page 24
page 24
page 24
page 25
page 25
page 25
page 25
page 25
page 26
page 27
page 27
page 27
page 27
page 27
page 27
page 30
page 31
page 31
page 31
page 31
page 32
page 32
page 32
page 33
page 34
page 34
page 2
22