Bosch GKS Professional 235 Turbo Manual Original página 16

OBJ_BUCH-2470-002.book Page 16 Monday, September 19, 2016 10:32 AM
16 | English
Noise/Vibration Information
Sound emission values determined according to
EN 60745-2-5.
Typically the A-weighted noise levels of the product are:
Sound pressure level 93 dB(A); Sound power level
104 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values a (triax vector sum) and uncertainty K
h
determined according to EN 60745-2-5:
2
Cutting wood: a =3.5 m/s , K=1.5 m/s
h
The vibration level given in this information sheet has been
measured in accordance with a standardised test given in
EN 60745 and may be used to compare one tool with anoth-
er. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main ap-
plications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is
poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total
working period.
An estimation of the level of exposure to vibration should also
take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total working
period.
Technical Data
Circular Saw
Article number
Rated power input
No-load speed min
Rotational speed under load,
max. min
Cutting depth, max.
– for 0° bevel angle
– for 45° bevel angle
Spindle lock
Base plate dimensions
Saw blade diameter, max.
Saw blade diameter, min.
Blade thickness, max.
Tooth thickness/setting, max.
Tooth thickness/setting, min.
Mounting bore
Weight according to
EPTA-Procedure 01:2014
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For different voltages and models for specific countries, these values can vary.
Starting cycles generate brief voltage drops. Interference with other equipment/machines may occur in case of unfavourable mains system conditions.
Malfunctions are not to be expected for system impedances below 0.14 ohm.
1 609 92A 2G6 | (19.9.16)
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organisation of work pat-
terns.
Declaration of Conformity
We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, until
19 April 2016: 2004/108/EC, from 20 April 2016 on:
2
2014/30/EU, 2006/42/EC including their amendments and
complies with the following standards: EN 60745-1,
EN 60745-2-5, EN 50581.
Technical file (2006/42/EC) at:
Robert Bosch Power Tools GmbH, PT/ECS,
70538 Stuttgart, GERMANY
Henk Becker
Executive Vice President
Engineering
Robert Bosch Power Tools GmbH
70538 Stuttgart, GERMANY
Stuttgart, 01.01.2017
GKS 235 Turbo GKS 235 Turbo
3 601 EA2 0.. 3 601 EA2 0B.
W 2050
-1
5300
-1
3500
mm 85
mm 65

mm 383 x 170 383 x 170
mm 235
mm 230
mm 2.2
mm 3.2
mm 2.0
mm 25
kg 7.6
/ II
Helmut Heinzelmann
Head of Product Certification
PT/ECS
GKS 235 Turbo
3 601 EA2 001 3 601 EA2 00.
3 601 EA2 071 3 601 EA2 07.
2050 2050
5300 5300
3500 3500
85 85
65 65
 
383 x 170 383 x 170
235 235
230 230
2.2 2.2
3.2 3.2
2.0 2.0
25.4 30
7.6 7.6
/ II / II
Bosch Power Tools
GKS 9
2050
5300
3500
85
65

235
230
2.2
3.2
2.0
30
7.6
/ II