Onkyo A-9130 Manual De Instrucciones página 10

Connecting players (LINE IN
connection)
a Analog Audio Cable
a
a
Use an Analog audio cable to connect a player to one of the
LINE IN 1/2/3/4/5 jacks. Refer to "Connecting with Onkyo RI
Components" (p11) to use the RI function.
10
Connecting players (Turntable
connection)
a Analog Audio Cable
Tuner
Use an analog audio cable to connect a turntable that uses
CD
an MM-type cartridge to the PHONO (MM) jack.
If the turntable has a ground wire, connect it to the GND
terminal. With some turntables, connecting the ground wire
may cause hum, in which case it should be disconnected.
0 If the turntable has a built-in audio equalizer, connect it to
an LINE IN jack other than the PHONO (MM) jack. Also, if
the turntable uses an MC type cartridge, install an audio
equalizer compatible with the MC type cartridge between
the unit and the turntable, then connect to any LINE IN
jack other than the PHONO (MM) jack.
a
Preparations
Turntable