Publicidad
Idiomas disponibles
Idiomas disponibles
Rear Panel
1. RI REMOTE CONTROL jack: This jack is for linking when
you connect an Onkyo CD player, tuner, network audio
player, or RI dock that has an RI ("Remote Interactive")
jack. (p11)
2. DIGITAL IN COAXIAL D1/DIGITAL IN OPTICAL D2 jacks:
Input digital audio signals from a playback device with a
digital coaxial cable or digital optical cable. (p9)
3. SPEAKERS terminals: Connect speakers with speaker
cables. (Not compatible with connection using banana
plugs or Y plugs.) (p8)
4. AC INLET: Connect the supplied power cord. (p12)
5. GND terminal: The ground wire of the turntable is
connected.
6. PHONO (MM) jacks: Use an Analog audio cable to
connect a Turntable that uses an MM type cartridge.
(p10)
7. LINE IN jacks: Input audio signals from a playback device
with an analog audio cable. (p10)
8. LINE OUT jacks: Use an Analog audio cable to output
audio signals to recording equipment, such as a cassette
tape deck. To select the input source for recording, use
the INPUT dial on this unit or use the remote controller.
9. MAIN IN jacks: When using this unit as a power amplifier,
connect the pre-amplifier here. (p12)
10.SUBWOOFER PRE OUT jack: Connect a powered
subwoofer with a subwoofer cable. (p9)
Before use
5
En
Publicidad
