Publicidad
E N G L I S H
MAINS SUPPLY
- The instrument can be powered by
a mains adaptor (not included) with the following
characteristics in output: VDC = 5V; I = 500 mA
(positive central terminal). Insert the jack
s
in the DC 5V socket
.
WARNING: The transformer, power supply used with the electric toy shall be regularly
examined for damage to the supply cord, plug, enclosure or other parts, and in the
event of damage, it shall not be used until the damage has been repaired.
• the transformer or power supply is not a toy.
• Make sure the toy is disconnected from the power supply unit before cleaning it.
• the toy shall only be used with a transformer for toys or a power supply for toys.
This toy is only to be connected to equipment bearing either of
the following symbols.
NOTE: Rating plate information was located at bottom enclosure of the apparatus.
BATTERY SUPPLY
Use a screwdriver to open the battery compartment.
Insert
3 x 1.5 V batteries R6/
(not supplied), ensuring
AA
correct polarity (+/–). Re-fit
battery cover. Replace bat-
teries when the quality of
sound becomes bad. Use
alkaline
batteries
obtain a longer duration
ATTENTION – BATTERY CARE
Non-rechargeable batteries are not to be recharged. •
Rechargeable batteries must be removed from the toy
before being charged. • Rechargeable batteries are only to
be charged under adult supervision. • Different types of
batteries or new and old batteries are not to be mixed. • Use
only batteries of the same or equivalent type. • Batteries are
to be inserted with correct polarity. • Remove exhausted
batteries to prevent leakage. • Do not short-circuit supply
terminals. • Remove batteries during long periods of non-
use.
WASTE DISPOSAL STANDARDS
For information regarding the disposal of the items
mentioned here below, please refer to Council Administration
office regarding specialised waste collection centres.
1. DISPOSAL OF BATTERIES:
Protect the environment by disposing of batteries in the special
containers provided for this use.
2. PACKAGING DISPOSAL:
Take the paper, cardboard and corrugated
board to the appropriate waste collection
centres. Plastic material must be placed in the relevant
collection containers.
The symbols indicating the various types of plastic are:
01
02
PET
PE
PVC
Key for the different types of plastic materials:
PET = Polyethylene terephtalate • PE = Polyethylene, code
02 for PE-HD, 04 for PE-LD • PVC =Polyvinyl chloride • PP =
Polypropylene • PS = Polystyrene, Polystyrene foam • O =
Other polymers (ABS, Laminates, etc.)
to
.
03
05
06
07
PP
PS
O
3. DISPOSING OF ELECTRICAL APPLIANCES:
The wheelie bin symbol with a cross indicates
that the product must not be disposed of in the
domestic waste at the end of its useful life.
Instead, it should be taken to your nearest
designated collection point or recycling facility.
Alternatively, check with your retailer and return the product
when buying a replacement, on a one-to-one basis or as free
of charge in case the size is smaller than 25 cm. Appropriate
disposal promotes the recycling of parts and materials, as
well as helping to protect the environment and human
health. Under current legislation, strict penalties are
enforced against those disposing of products illegally. For
more information about the collection of special waste,
contact your Local Authority.
SWITCHING ON/OFF
To switch on the instrument move selector
switch the instrument off, move the same selector to OFF.
DEMOSONGS
This keyboard has 6 demosongs. To choose the pre-
recorded tracks, press the SELECT key
e
Press DEMO key
, to listen to the demosongs in
c
sequence. Press STOP
VOLUME CONTROL
Adjust volume to desired level by using the VOLUME
m
buttons
.
SOUNDS
You can select one of the 8 sounds by pressing the rela-
a
ted button
.
RHYTHMS
You can select one of the 8 rhythms
related buttons.
Press the TEMPO buttons
the rhythm speed. Press STOP
rhythm is playing, press the PLAY/CHORD
an arrangement.
OKON (One Key One Note)
f
Press OKON button
; try to play the melody of the song
by casually and repeatedly pressing one or more keys on
the keyboard, trying to keep tempo. Press OKON again to
exit the mode.
RECORD/PLAYBACK FUNCTION
This function enables you to record and playback a tune
played on the keyboard. Press RECORD
ing a tune. When you have finished press PLAY
listen to the tune. Press the TEMPO buttons
ce (–) or increase (+) the speed.
o
to ON. To
d
in succession.
to interrupt.
b
by pressing the
n
to reduce (–) or increase (+)
c
to interrupt. While a
i
key to add
g
before play-
n
to redu-
i
to
5
Publicidad
