Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Installation instructions for part AXGMLN-02
GM Data Interface
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, speed sense)
• Retains chimes
• Pre-wired AXSWC harness
(AXSWC sold separately)
BUICK
CHEVROLET
Avalanche ∆ 2007-2013
Enclave
2008-up
Captiva Sport 2012-2015
Lucerne
2006-2011
Equinox
CADILLAC
Impala
DTS
2006-2011
Impala Limited 2014-2016
Escalade
2007-2014
Monte Carlo 2006-2007
Escalade ESV 2007-2011
Silverado 2500/3500 ∆
Escalade EXT 2007-2014
SRX
2007-2009
Silverado (new body) ∆
Suburban ∆ 2007-2014
∆ For 2012-up models with NAV use the AXGMLN-07.
Axxess Integrate
AXGMLN-02
2006-Up
INTERFACE FEATURES
• Retains OnStar / OE Bluetooth
• Adjustable OnStar level
• Designed for amplified models
• Retains balance and fade
• AXUSB-CBL (sold separately) updatable
APPLICATIONS
CHEVROLET (CONT)
Tahoe ∆
2007-2014
Traverse
2009-up
2007-2009
GMC
2006-2013
Acadia
2007-2016
Acadia Limited
Sierra 2500/3500 ∆ 2014
Sierra (new body) ∆
2014
2007-2013
Yukon / Yukon XL ∆
2007-2013
2007-2014
axxessinterfaces.com
HUMMER
H2
2008-2009
PONTIAC
Torrent
2007-2009
SATURN
2017
Outlook
2007-2010
Vue
2008-2010
SUZUKI
XL-7
2007-2009
•
metraonline.com
Table of Contents
Connections to be made .........................................2
Installing the AXGMLN-02 ......................................3
Initializing the AXGMLN-02 ....................................3
Adjusting the AXGMLN-02 ......................................3
INTERFACE COMPONENTS
• AXGMLN-02 interface • AXGMLN-02 harness
• 16-pin harness with stripped leads
• Backup camera harness • Antenna adapter
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
• Small flat-blade screwdriver
CAUTION!
All accessories, switches, climate controls panels, and
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Publicidad
Manuales relacionados para Axxess AXGMLN-02
Resumen de contenidos para Axxess AXGMLN-02
- Página 1 • Designed for amplified models reverse, speed sense) INTERFACE COMPONENTS • Retains balance and fade • Retains chimes • AXGMLN-02 interface • AXGMLN-02 harness • AXUSB-CBL (sold separately) updatable • Pre-wired AXSWC harness • 16-pin harness with stripped leads (AXSWC sold separately) •...
- Página 2 • Connect the White/Black wire to the left front negative speaker output. • Connect the Red wire to the accessory wire. Note: The relay attached to the AXGMLN-02 harness is only for audible turn signal • Connect the Green wire to the left rear positive speaker output.
- Página 3 With the key in the off position: • With the vehicle and radio turned on, turn the volume up 3/4 of the way. • Connect the 16-pin harness with stripped leads, and the AXGMLN-02 harness, • With a small flat-blade screwdriver, adjust the potentiometer clockwise to into the interface.
- Página 4 Installation instructions for part AXGMLN-02 IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated.
- Página 5 • Retiene el balance y la intensidad COMPONENTES DE LA INTERFASE reversa y sensor de velocidad) • Actualizable por AXUSB-CBL • Interfase AXGMLN-02 • Arnés AXGMLN-02 • Retiene los tonos (se vende por separado) • Arnés de 16 pins con conectores pelados •...
- Página 6 • Conecte el cable blanco/negro con la salida negativa de la bocina izquierda delantera. Nota: El relé sujetado al arnés del AXGMLN-02 es solo para chasquido de señal • Conecte el cable verde con la salida positiva de la bocina izquierda trasera.
- Página 7 Con la llave en la posición de apagado: • Con el vehículo y el radio encendidos, aumente el volumen hasta 3/4 de su totalidad. • Conecte el arnés de 16 pins con conectores pelados, y el arnés AXGMLN-02, a •...
- Página 8 Instrucciones de instalación para la pieza AXGMLN-02 IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente...