Axxess AXVI-9006 Instrucciones De Instalación

INTERFACE COMPONENTS
• AXVI-9006 interface
• AXVI-9006 harness
APPLICATIONS
Volkswagen
Beetle 2016-2019
Golf Series 2015-Up
Jetta 2016-2018
AxxessInterfaces.com
Volkswagen
Visit AxxessInterfaces.com
vehicle specific applications
INTERFACE FEATURES
• Provides accessory power
(12-volt 10-amp)
• Retains R.A.P. (retained
accessory power)
• Provides NAV outputs (parking
brake, reverse, speed sense)
• For use in non-amplified
systems, or when replacing an
amplified system
Jetta GLI 2016-2018
Passat 2016-Up
Tiguan 2016-2017
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION
Data Interface 2015-Up
for more detailed information about the product and up-to-date
• 48-inch leads for remote tuner
location
• Pre-wired AXSWC harness
(AXSWC sold separately)
• Retains the factory backup
camera
• Retains balance and fade
• Micro-B USB updatable
AXVI-9006
I N S TA L L AT I O N I N S T R U C T I O N S
TABLE OF CONTENTS
Connections ............................................................2
Installation .............................................................3
Programming .........................................................3
TOOLS REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Small flat-blade screwdriver
Attention!
Let the vehicle sit with the key
out of the ignition for a few minutes before
removing the factory radio. When testing the
aftermarket equipment, ensure that all factory
equipment is connected before cycling the
key to ignition.
REV. 1/24/20 INSTAXVI-9006