Axxess AXRC-GM1 Instrucciones De Instalación

AXRC-GM1
GM Data Bus Interface
2000-2013
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake, reverse,
and speed sense)
• Used in non-amplified models, or when
bypassing a factory amplifier
INTERFACE COMPONENTS
• AXRC-GM1 interface • AXRC-GM1 harness
See inside front cover
axxessinterfaces.com
Axxess Integrate
Installation instructions for part AXRC-GM1
FEATURES
• Used in models without OnStar
• Retains all warning chimes
• High level speaker input
• Retains balance and fade
• Micro "B" USB updatable
APPLICATIONS
Connections to be made ............................................3
Installing the AXRC-GM1 ...........................................3
Initializing the AXRC-GM1 .........................................3
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
•
metraonline.com
Table of Contents
All accessories, switches, climate controls panels, and
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION