Publicidad
Idiomas disponibles
Idiomas disponibles
Security
Bracket
2 Screws
NOTICE
To ensure proper function, DO NOT overextend or bend the hose. Make sure that there are no
objects within 20in (~500mm) of the inlet and outlet hose. All illustrations in this manual are for
explanation purposes only, your air conditioner may be slightly different than shown.
Water Drainage
Remove
the upper
drain plug
Continuous
drain hose
User Manual
6. If desired, install the security bracket with 2 screws as
shown.
7.
Attach the Sliding Window Adapter to the hose by lining up
the circles on the adapter the hose. Insert the window slider
adapter into the hole of the window slider.
•
During Dry modes, remove the upper drain plug from the
back of the unit and install the drain hose.
For models without drain connector, just attach the drain
hose to the hole. Place the end of the hose directly in the
drain area you're using.
Page 17
Publicidad
