Garland GRASS 1065 ZSH Manual De Instrucciones página 41

6.2.2. ASSEMBLING THE SACK
1.- Lift the rear output cover and install the 2 blocks
(P).
P
Lift the rear outlet cover and engage the protrusions
on the chassis of the bag (1) and (2).
6.2.3 ASSEMBLING THE LATERAL EXIT
6.2.4. ASSEMBLING THE MULCHING PLUG
Lift the rear outlet cover and install the mulching plug
in the rear output channel as shown in the figure.
P
1
2
Lift the cover from the side
exit and install the side
deflector.
Then lower the rear output cover.
6.2.5. FUEL
IMPORTANT: The fuel used for this machine
is highly flammable. If the fuel or the
machine ignites, put out the fire with a dry powder
extinguisher.
Petrol and oil are extremely flammable and
explosive under certain conditions. Do not
smoke and keep flames, sparks or heat
away from the machine.
Use unleaded gasoline 95 octane.
Do not use fuel that has been stored for longer than
2 months. A fuel stored for too long will cause the
starting of the machine to be more difficult and result
in unsatisfactory engine performance. If the fuel
has been in the machine's tank for longer than two
months, empty the tank and replace it with fuel in
perfect condition.
6.3.1. FILLING THE FUEL TANK
- Choose a suitable area to perform this operation.
- Remove the fuel tank cap and fill with fuel.
- Tightly close the fuel tank's cap and remove all the
fuel that spilled with a dry cloth.
WARNING:
Stop the engine before refueling.
41/172
English
Mulching plug