Turbosound iNSPIRE iP3000 Guia De Inicio Rapido página 10

18
iNSPIRE iP3000
IMPORTANT NOTE: The mounting of a permanently installed sound system may be dangerous unless undertaken by qualified personnel with the required experience
and certification to perform the necessary tasks. Walls, floors or ceilings must be capable of safely and securely supporting the actual load. The mounting accessory
used must be safely and securely fixed both to the loudspeaker and to the wall, floor or ceiling.
When mounting rigging components on walls, floors or ceilings, ensure that all fixings and fasteners used are of an appropriate size and load rating. Wall and
ceiling claddings, and the construction and composition of walls and ceilings, all need to be taken into account when determining whether a particular fixing
arrangement can be safely employed for a particular load. Cavity plugs or other specialist fixings, if required, must be of an appropriate type, and must be fitted and
used in accordance with the maker's instructions.
The operation of your speaker cabinet as part of a flown system, if installed incorrectly and improperly, can potentially expose persons to serious health risks
and even death. In addition, please ensure that electrical, mechanical and acoustic considerations are discussed with qualified and certified (by local state or
national authorities) personnel prior to any installation or flying.
Make sure that speaker cabinets are set up and flown by qualified and certified personnel only, using dedicated equipment and original parts and components
delivered with the unit. If any parts or components are missing please contact your Dealer before attempting to set up the system.
Be sure to observe the local, state and other safety regulations applicable in your country. Music Tribe, including the Music Tribe companies listed on the enclosed
"Service Information Sheet", assumes no liability for any damage or personal injury resulting from improper use, installation or operation of the product.
Regular checks must be conducted by qualified personnel to ensure that the system remains in a secure and stable condition. Make sure that, where the speaker
is flown, the area underneath the speaker is free of human traffic. Do not fly the speaker in areas that can be entered or used by members of the public.
Speakers create a magnetic field, even if not in operation. Therefore, please keep all materials that can be affected by such fields (discs, computers, monitors, etc) at a
safe distance. A safe distance is usually between 1 and 2 metres.
Gracias por elegir un altavoz Turbosound para su aplicación. Si desea obtener más información sobre este o cualquier otro producto Turbosound, visite nuestro sitio
web en turbosound.com.
Desembalaje del altavoz
Después de desembalar la unidad, compruebe cuidadosamente si hay daños. Si encuentra daños, notifique a su proveedor de inmediato. Usted, el destinatario,
debe iniciar cualquier reclamación. Conserve todo el embalaje en caso de reenvío futuro.
Para iP3000, las fundas y las bandoleras están disponibles por separado.
Montaje
Los altavoces iP3000 se envían con elementos de columna y base separados que deberán ensamblarse.
Para ensamblar los altavoces, siga estos pasos:
1. Asegúrese de que la unidad esté apagada.
2. Coloque la unidad base sobre una superficie firme y nivelada, con las entradas de conexión de la columna hacia arriba.
3. Alinee la columna del altavoz sobre las entradas de conexión de la unidad base con los conectores de la columna hacia abajo.
4. Baje la columna del altavoz en la entrada de conexión y presione suavemente hacia abajo hasta que los conectores de la columna encajen en su lugar.
Nota: iP3000 cuenta con un conjunto de columna de 2 piezas. Primero conecte el conjunto de la columna inferior a la unidad base y luego conecte el segmento de la
columna superior directamente sobre el segmento inferior.
Una vez que el conjunto de la columna esté firmemente colocado en su lugar, los altavoces del iP realizarán automáticamente todas las conexiones de alimentación y
audio entre la unidad base y la columna del altavoz.
Quick Start Guide
iP3000
19