Publicidad
Idiomas disponibles
Idiomas disponibles
16
iNSPIRE iP3000
9. Once the linking process is complete, Bluetooth audio will stream to the two speakers. The MASTER speaker will receive the left channel, and the SLAVE speaker will
receive the right channel.
10. MASTER and SLAVE connection will be indicated on the main, top-level DSP screens.
*iPad and Apple are trademarks of Apple Inc. Android is a trademark of Google Inc. Windows is either a registered trademark or trademark of Microsoft Corporation in the United States and/or
other countries.
Bluetooth Control
A dedicated iOS control app for Turbosound Bluetooth speakers can be downloaded from the Apple Store.
This iOS control app can be used with Bluetooth pairing, or without pairing if only analogue inputs are used.
If the App is connected to the speaker, you will see the following screen:
Operation with Bluetooth Pairing
• •
In both mono and stereo mode, first pair the MASTER speaker, and then launch the iOS control app.
The iOS control app will automatically detect and adapt for mono or stereo mode.
• •
• •
To alter the speaker settings, swipe the screen or press the settings icon. All iP speaker settings can be accessed from the iOS control app.
Operation without Bluetooth Pairing (Analogue Input Only)
• •
Power on the first (usually left-hand) speaker – this speaker will become the MASTER speaker.
• •
Start the control app on the IOS device.
• •
Check that the app is connected and functioning with the single MASTER speaker.
• •
Power up the second speaker – this speaker becomes the SLAVE speaker.
Check that the app's Main Page shows both MASTER and SLAVE input and balance control.
• •
Main Page (1 speaker)
Main Page (2 speakers linked)
DFU Firmware Update
Where possible please update your iP3000 firmware using the iOS or Android app.
To update, go to the Settings screen in the app and look for the "CURRENT FIRMWARE" section. This section of the Settings screen will show the current
firmware version. If a firmware update is needed, the screen will display this option:
• •
Swipe the update slider toward the right to initiate the firmware update. The update may take several minutes.
• •
Update progress will be displayed on the app and the iP3000 speaker's DSP screen.
Firmware Update Fallback Procedure
In the event you are unable to update the firmware using the iOS app, you may also carry out the update using this fallback procedure:
1. Download the .dfu file with the new firmware version to your smartphone.
2. Force your iP3000 speaker into DFU update mode by following these steps:
a. Power off the speaker.
b. Hold the ENCODER KNOB.
c. Power on the speaker. You will see the following screen:
d. Please select the option "Firmware upgrade" then press the ENCODER KNOB.
e. When you are successful, the DSP screen will show the system is ready for the firmware upgrade.
Settings Page
3. On your smartphone, select and hold the .dfu file until the smartphone offers options for file transfer.
4. Select your smartphone's function for sharing via Bluetooth.
NOTE: Some smartphones need to be paired with the speaker before file transfer.
5. Select the iP3000 speaker for Bluetooth sharing (e.g., "HUAWEI P7-L07").
6. When the download begins, the DSP screen will show the download progress.
7. When the download is complete,the speaker will auto-restart and boot the new firmware.
17
Quick Start Guide
Publicidad
