Turbosound iNSPIRE iP3000 Guia De Inicio Rapido página 7

12
iNSPIRE iP3000
Thank you for choosing a Turbosound loudspeaker product for your application. If you would like further information about this or any other Turbosound product,
please visit our website at turbosound.com.
Unpacking the Loudspeaker
After unpacking the unit please check carefully for damage. If damage is found, please notify your supplier at once. You, the consignee, must instigate any claim.
Please retain all packaging in case of future re-shipment.
For iP3000, covers and shoulder bags are available separately.
Assembly
iP3000 speakers ship with separate base and column elements that will need to be assembled.
To assemble the speakers, follow these steps:
1. Make sure the unit is switched off.
2. Place the base unit onto a firm, level surface, with the column connection inputs facing upward.
3. Align the speaker column over the base unit's connection inputs with the column connectors facing downward.
4. Lower the speaker column into the connection input and gently press downward until the column connectors slot into place.
Note: iP3000 features a 2-piece column assembly. Connect the lower column assembly to the base unit first, and then connect the upper column segment directly on
top of the lower segment.
Once the column assembly is firmly slotted into place, the iP speakers will automatically make all power and audio connections between the base unit and the
speaker column.
iP3000
iNSPIRE iP3000 Controls
(2)
(3)
(4)
(1) ENCODER KNOB toggles between Graphic and Edit modes (when pressed) and changes parameter values (when rotated).
(2) LCD SCREEN displays the current DSP module and parameter settings.
(3) PROCESS button accesses the DSP signal processing menu.
(4) SETUP accesses the setup features menu.
(5) EXIT button saves changes and returns to the previous menu screen.
(6) ENTER button selects sub-menu or confirms parameter changes.
(7) INPUT A/INPUT B combo jacks accept input signals using XLR, balanced ¼" TRS or unbalanced ¼" TS connectors.
(8) LINK A/LINK B XLR connectors provide un-processed copies of the INPUT A or INPUT B signals.
Quick Start Guide
(1)
(6)
(5)
(7)
(8)
13