Turbosound iNSPIRE iP3000 Guia De Inicio Rapido página 11

20
iNSPIRE iP3000
iNSPIRE iP3000 Controles
(2)
(3)
(4)
(1) PERILLA CODIFICADOR alterna entre los modos Gráfico y Edición (cuando se presiona) y cambia los valores de los parámetros (cuando se gira).
(2) PANTALLA LCD muestra el módulo DSP actual y la configuración de los parámetros.
(3) PROCESO El botón accede al menú de procesamiento de la señal DSP.
(4) CONFIGURACIÓN accede al menú de funciones de configuración.
(5) SALIDA El botón guarda los cambios y regresa a la pantalla del menú anterior.
(6) INGRESAR El botón selecciona el submenú o confirma los cambios de parámetros.
(7) ENTRADA A / ENTRADA B Las tomas combo aceptan señales de entrada usando conectores XLR, TRS balanceados de ¼ "o TS de ¼" no balanceados.
(8) ENLACE A / ENLACE B XLR Los conectores proporcionan copias sin procesar de las señales INPUT A o INPUT B.
(1)
(6)
(5)
(7)
(8)
Estructura del menú iP DSP
Menú Submenú
PROCESS
SETUP
*iPhone is a trademark of Apple Inc. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks is under license.
iP Series Analogue Connection
Despite their sophistication, iP speakers offer straightforward analogue connectivity, and you can easily arrange the iP system to allow simple control of levels from
other devices, such as mixers. You can also daisy-chain multiple iP speakers using only the analogue connections, and then directly control the overall level from your
mixer's master fader.
For example, you have four iP speakers and a mixer with simple left-right stereo outputs. For typical operation, set the DSP volume and input gain settings on all
speakers to a flat "0 dB" setting. Connect the mixer's left and right stereo outputs to the first two speakers' analogue INPUT A connections (the left and right mixer
outputs will go to separate speakers). Then, run cables from the OUTPUT analogue connections to the remaining two speakers. In a similar way, subwoofers can also
be linked to the analogue OUTPUT.
Quick Start Guide
Rango completo Función
Displays level indicators and model name.
Displays the following Bluetooth* status information:
• •
Bluetooth symbol indicates connection to audio and/or
remote control device (iPhone*, etc.).
• •
" " indicates that the remote control APP connected.
• •
Main Screen " " indicates audio streaming is connected.
• •
"M" or "S" indicates that the speaker is linked to
another iP speaker as MASTER (left channel, "M")
or SLAVE (right channel, "S").
Rotate the encoder knob to adjust the output volume.
Press the encoder knob enter the last used sub-menu.
Press the Process and Setup buttons to access sub-menus.
Volume Rotate the encoder to change the output volume.
Selects from 4 preset equalisation settings, depending on function
MODE
and music type.
EQ
Allows adjustment of three band equaliser with controls for bass,
mid range and treble.
(Equalisation)
Sets input mixer level EQ and reverb for analogue input A and B,
INPUT
as well as level for Bluetooth.
POSIT.
Selects DSP compensation depending on the speaker position:
corner, wall or floor.
(Position)
SUBWOOFER Allows control of subwoofer relative level.
SETUP Sets LCD back panel contrast, device lock and factory reset.
BT
Lets you pair the speaker with mobile Bluetooth devices and link to
another iP speaker as MASTER / SLAVE.
(Bluetooth)
INFO Displays model and firmware information.
21