Setup Wi-Fi Connection - Explore Scientific WSX1001 Manual De Instrucciones

4. Write down your ID and key for the further setup step.

SETUP WI-FI CONNECTION

1. When you first power up the console, or press and hold the [ SENSOR / WI-FI ]key for 6
seconds in normal mode, the console LCD will show "AP" and "
entered AP (access point) mode, and is ready for WI-FI settings.
2. Use the smart phone, tablet, or computer to connect to the console through WI-FI.
3. In PC choose WiFi network settings or In Android / iOS choose setting
console's SSID: PWS-XXXXXX in the list and it will need several second to connect.
PWS-XXXXXX
PC WI-FI network interface
4. Once connected, enter the following IP address into your internet browser's address bar, to
access the console's web interface:
Android WI-FI network interface
http://192.168.1.1
12
" icon to signify that it has
WI-FI to select the
PWS-XXXXXX