GreenWorks MO24B00 Manual Del Operador página 10

EN
Remove the battery pack and safety key before turning over
the machine to adjust the cutting height.
20
1. Turn the machine over to access the front and rear cutting
height adjustment.
2. Push the axle (20) forward to unlock the cutting height
adjustment.
3. Move the axle into one of the three positions. Make sure
that the two sides of the axle are in the same height.
4. Make sure that the four wheels are assembled in the same
cutting height and scroll smoothly and unclogged.
7.6 INSTALL THE BATTERY PACK
15
14
WARNING
20
6
16
English
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and follow the instructions in the battery
and charger manual.
1. Open the battery door (6).
20
2. Align the lift ribs on the battery pack (14) with the
grooves in the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
The motor starts only when you put in the safety key (16).
7.7 REMOVE THE BATTERY PACK
1. Open the battery door (6).
2. Remove the safety key (16).
3. Push and hold the battery release button (15).
4. Remove the battery pack (14) from the machine.
8 OPERATION
Wear eye protection during operation.
8.1 START THE MACHINE
1
2
Install the grass catcher before mowing.
10
WARNING
NOTE
WARNING
NOTE