Nilfisk VHW310X Manual De Instrucciones página 25

VHW310 - VHW311
Motor cooling fan inspection and cleaning
Periodically clean the motor cooling fan to prevent the motor
from overheating, especially if the device is used in a dusty
place.
Tightness inspection
1. Blower connecting hose
2.
Vacuum hose
Hoses check
Make sure that connecting hose (1) is in a good condition and
correctly fixed.
If the hose is damaged, broken or badly connected to the
unions, it must be replaced.
When sticky materials are treated, check for possible clogging
along the hose (2), in the inlet and on the baffle plate inside
the container.
Scrape the inlet from the outside and remove the deposited
waste as indicated in the figure.
GB
C391
Figure 12
Disposing of the vacuum cleaner
Equipment marked with the crossed-out wheeled bin symbol
indicates that used electrical and electronic equipment should
not be discarded together with unseparated household
waste. To avoid negative effects on human health and the
environment the equipment must be collected separately at
the designated collection points.
Users of electrical and electronic household equipment must
use the municipal collection schemes. Please note that
commercially used electrical and electronic equipment, shall
not be disposed of via municipal collection schemes. We will
be pleased to inform you about suitable disposal options.
Wiring diagrams
Basic model
1. Plug
2.
Vacuum cleaner
3. Circuit breaker
Item Part
Circuit breaker
Q1
Box for Q1
10
Figure 13
Figure 15
Code
VHW310
VHW311T
(if equipped)
Z8 39319 Z8 39319
Z8 39932 Z8 39932
08/2018