Ega Master 60194 Manual De Instrucciones página 16


Never operate radial presses when the tongs shank is not locked. Risk of fracture.

Always position radial presses tongs on the press fitting al right angles to the pipes axis.
Never position it askew.

Do not start radial presses without pressing tongs inserted. Do not start the pressing
operation except to make a press joint. Unless counter pressure is applied by the press
fitting, the drive unit or pressing tongs will be needlessly stressed.

Before using pressing tongs from other manufacturers, check that they are suitable for the
drive unit. Consult and comply with the pressing tongs manufacturers' instructions for use.

Only operate axial presses with the pressing heads fully inserted. Risk of fracture.

Always position presses with the pressing tongs on the compression sleeve fitting at right
angles to the pipe axis. Never position it askew.

Screw expanding heads as far they will go onto the expander.

Do not attempt to repair damaged pressing tongs, pressing heads or expanding heads. Risk
of fracture.

Consult and comply with the instructions for installation and fitting of the system's
manufacturers.
TECHNICAL DATA
Pressmatic Portable CCA
CODE VOLTAGE
60196 230V 50-60 Hz
60197 110V 50-60Hz
85000 Battery
85001
Quick charger
85004
85002
Connection
85003
Pressmatic CCA
CODE VOLTAGE
60194 230V 50-60 Hz
60195 110V 50-60Hz
Radial press fitting plier
CODE LENGTH WEIGHT
CAPACITY WEIGHT
10-76 (108) 4.5 Kg
12V, 2.0 Ah
230V, 50-60Hz, 50W
110V, 50-60Hz, 50W
230V
110V
CAPACITY WEIGHT
10-76 (108) 4.8 Kg
BATTERY
Si
W BATTERY
450W No