Publicidad
Idiomas disponibles
Idiomas disponibles
Reconnecting
Once the Bluetooth device has been paired, you can touch the connect
button to reconnect.**
* Function belongs to the mobile Phone or PDA
** Double click activation
NOTE: You can only connect to a phone using the buttons on the on-screen Phone interface.
Each time the
button is pressed, the head unit will automatically reconnect with the mobile phone once (only if the
mobile phone was previously paired with the head unit).
Managing Incoming Calls
When connected to a Bluetooth phone, the unit will mute audio output, pause CD play, and change to the Bluetooth
screen when a call is received. An incoming phone number will appear at the top of the screen. If the screen is closed,
the number will scroll across the LCD. If the incoming call has no caller ID, the TFT or LCD will display "Restricted
Number".
Answering an Incoming Call
To answer the call, touch the
button. For best reception, speak loudly and clearly. The microphone is located on the
left side of the unit.
To end the conversation, press the button. The screen will display the call duration for 3 seconds, and then return to the
previous mode.
Rejecting an Incoming Call
Touch the
button to reject an incoming call. The call will revert to your phone and can be answered directly or left
for voice mail.
Volume Control
To increase or decrease the volume level, turn the rotary encoder (5) on the front panel or press the VOL+/ VOLbuttons
(15, 16) on the remote control.
Microphone Mute
To mute the microphone, touch the button. Touch again to resume microphone functionality.
Making an Outgoing Call
NOTE: Press the
button from the main Bluetooth screen to automatically dial the last call received.
1. Touch the button to open the direct dial screen.
2. Use the 0-9, *, and # buttons to input the phone number.
• Touch the CLEAR button to clear the last digit.
• Touch the button to clear the entire number and start over.
3. After entering the phone number, press the button to dial the call. The direct dial screen will close once your call is
connected. To end the conversation, press the button.
Call Transfer
While talking, to transfer audio from the head unit back to the mobile phone, touch the button (7). The TFT will display
"Transfer". You can only transfer a call after it has been answered.
Menu List
The menu list appears on the left side of the screen and can be accessed from other modes by touching the MENU but-
ton on the right side of the screen.
NOTE: Not all phones allow access to missed, received or dialed calls and some will not allow uploading of your
phone's address book.
96
Publicidad
