Remington precision HC-918 Manual De Instrucciones página 6

Disposal
Battery Removal
(HC-920 and HC-930)
When your rechargeable clipper reaches the
end of its useful life, the batteries must be
removed from the
clipper and recycled
or disposed of proper-
ly in accordance with
Ni-Cd
CONTAINS NICKEL-
your local and state CADMIUM BATTERY.
BATTERY MUST BE RECYCLED
requirements. OR DISPOSED OF PROPERLY.
The following procedure
should be followed for
battery removal:
Make sure your clipper is
unplugged from any out-
lets so you don't risk
an electric shock.
Remove the decorative
plug from the back cover.
Using a small Phillips
head screwdriver, remove
the screw from the back
of the clipper.
Pull or gently pry the clipper halves
apart, exposing the batteries.
Remove batteries from unit.
Twist batteries to break wires.
Wires may also be cut.
10
CAUTION: THESE NICKEL-CADMIUM
BATTERIES MUST BE RECYCLED
OR DISPOSED OF IN ACCORDANCE WITH
STATE AND LOCAL REGULATIONS.
Do not burn or mutilate, as they may burst
or release toxic materials. Do not short-
circuit, as this may cause burns.
The EPA-certified RBRC ® Battery Recycling
Seal on the nickel-cadmium (Ni-Cd) bat-
tery indicates Remington Products
Company, L.L.C. is voluntarily participat-
ing in an industry program to collect and
recycle these batteries at the end of their
useful life, when taken out of service in
the United States or Canada. The RBRC
program provides a convenient alterna-
tive to placing used Ni-Cd batteries into
the trash or the municipal waste stream,
which may be illegal in your area. Please
call 1-800-8-BATTERY SM for information
on Ni-Cd battery recycling and disposal
bans/restriction in your area. Remington
Products Company, L.L.C.'s involvement
in this program is part of our commit-
ment to preserving our environment and
conserving our natural resources.
Warranty Service
In the U.S. and Canada, service is provided
by our Company-owned Service Centers and
more than 300 Authorized Service Dealers.
For the address of your nearest authorized
Service Dealer, contact us at 800-736-4648
(in U.S.), 888-277-6333 (in Canada), visit our
website at www.remington-products.com or
consult your local Yellow Pages under
"Shaver-Electric-Repair."
U.S. customers may mail the product, post-
paid, with a copy of the sales receipt and a
letter explaining the problem, to this address:
®
Remington Products Company, L.L.C.
60 Main St.
Bridgeport, CT 06604
Attention: Service Department
KEEP ORIGINAL SALES RECEIPT AS PROOF
OF PURCHASE FOR WARRANTY PURPOSES.
For questions or comments, contact us:
Remington Products Company, L.L.C.
20 Constitution Boulevard South
P.O. Box 884
Shelton, CT 06484-0884
Attn: Consumer Affairs
800-736-4648
www.remington-products.com
Remington Products (Canada) Inc.
61 Amber Street.
Markham, Ontario L3R 3J7
Attn: Customer Service
888-277-6333
www.remington-products.com
Warranty
Remington and Precision are trademarks of
Remington Corporation, L.L.C. in the U.S.
Remington is a trademark of Remington
Corporation, L.L.C. in Canada.
© 2003 R.P.C, L.L.C.
Job #G03-022 10/03 Part No.13494
®
Remington Products Company, L.L.C.
60 Main Street
Bridgeport, CT 06604
MADE IN CHINA
Remington Products (Canada) Inc.
61 Amber Street
Markham, Ontario L3R 3J7
11