Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE START
If the appliance is registered on a home Wi-Fi network, this
function starts preheating and then holds the temperature
for up to an hour (including preheating time). If the
appliance is not registered on the network, "unavailable"
appears in the display. Follow the instructions on page 28
to register the appliance on the network.
Set the oven mode knob to the Remote Start position to
use the function.
Setting Remote Start
1. Open the oven door to make sure the oven is empty
and ready for pre-heating. Close the oven door.
2. Turn the oven mode knob to select Remote Start.
When "Remote Start Ready" appears in the display,
the Remote start function is ready to use.
3. Follow the directions in the smart phone application
to set the cook mode, temperature, and run time
(preheating time plus holding time).
NOTE
Do not place food in oven before or during Remote
Start run time.
Remote Start is disconnected in the following
situations:
• Remote Start is never set up in the smart phone
app.
• The Remote Start status is "unavailable" or "AFTER
OPENING AND CLOSING THE DOOR, PLACE THE
MODE DIAL BACK TO REMOTE START WITHIN 30
SEC".
27
USING thE OVEN
Publicidad
