38
MAINtENANcE
REMOVING AND REPLACING THE
LIFT-OFF OVEN DOOR
CAUTION
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
− The door is very heavy.
Removing the Door
1. Open the door fully.
2. Pull the hinge locks down toward the door frame to
the unlocked position.
Slot
Hinge
lock
Hinge
arm
Hinge lock open
3. Firmly grasp both sides of the door at the top.
4. Close door to the door removal position, which is
approximately 5 degrees.
about 5˚
5. Lift door up and out until the hinge arm is clear of
the slot.
Lock
Unlock
Replacing the Door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal
position, seat the indentation of the hinge arm into
the bottom edge of the hinge slot. The notch in the
hinge arm must be fully seated into the bottom of
the slot.
Hinge arm
3. Open the door fully. If the door will not open fully,
the indentation is not seated correctly in the bottom
edge of the slot.
4. Push the hinge locks up against the front frame of
the oven cavity to the locked position.
Hinge lock
Hinge locked
5. Close the oven door.
DOOR CARE INSTRUCTIONS
• Most oven doors contain glass that can break.
1. Do not close the oven door until all the oven racks
are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring, or stressing the glass may
weaken its structure causing an increased risk of
breakage at a later time.
Bottom
edge of
slot
Indentation
Hinge arm