Publicidad
Idiomas disponibles
Idiomas disponibles
5.
3.
INSTRUCTIONS FOR USE
Switching on/off
The appliance must be switched on after having filled
the cooking compartment with the material to be
processed.
Do not switch it on when the cooking compartment
is empty.
When the operations described on the previous page have been
performed successfully, do as follows to begin cooking:
1.
Turn the switch-on knob to "1". When the green light is on it
means the operation is in progress (Fig. 7).
2.
Turn the thermostat knob to adjust the cooking temperature.
When the yellow light is on it means heating is in progress
(Fig. 8).
3.
Turn the thermostat knob to "Zero" (Fig. 8A) to stop heat
generation.
4.
Turn the knob to "Zero" (Fig. 7A) to switch the appliance off
at the end of the work cycle.
During operation, check the level of the water inside
the cooking compartment and bring it to the correct
level as needed by acting on the water filling gate
valve.
Be careful of the residual risk of being burnt while
topping up the water. Use adequate prevention and
protection equipment.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
- 700
7
Fig.
8
Fig.
7A
Fig.
8A
Fig.
- 12 -
- 12 -
12
12
Publicidad
