Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION
• Place the wax particles you want to melt in the bowls (C). For an easier operation, the
heater features 4 bowls of different sizes that can be used to melt different wax
compositions separately.
• Close the lid of the unit (A) and turn the main switch (D) on (green light).
• Press the [ºC / ºF] key to select Celsius or Fahrenheit degrees (the display will show
ºC / ºF).
• Press the [S/C] key to programme the temperature. The pilot (I) will light up. Select
the temperature by pressing the [▼/▲] keys.
• Press the [S/C] key to see the actual temperature in the tank. The pilot (J) will light
up.
• After about 10 minutes, the wax will be ready to be used. The pilot light (H) will turn
off once the key-point temperature has been reached.
• Keep the lid (A) closed during the periods in which you do not need to remove any
wax. You will prevent spilling the wax. Outside particles and impurities will not enter
and contaminate the wax.
• After finishing the operation disconnect the heater by turning the main switch (D) off.
Handle the heater cautiously for several minutes until it has cooled down completely.
MAINTENANCE AND CLEANING
In order to ensure a long working life and an optimal operation we strongly
recommend:
• To clean the wax remains in the bowls, lid and cover periodically. To do it, you can
use a spatula. Make sure the wax heater has been previously disconnected from the
power source.
• To prevent spilling melted wax over the cover of the machine. Be cautious when
handling the spatula.
TECHNICAL SPECIFICATIONS
AC 230 V, 50/60
Voltage:
Fuse:
Power:
Temperature:
Depth:
Width:
Height:
Weight:
Hz
4 A
120 W
50 ~ 120 ºC
122 ~ 248 ºF
114 mm
192 mm
70 mm
1130 gr
English
9
Publicidad
